As i play catch up its non stop with Switch releases:
@DarkMelman from GBATemp reports he been able to get the payloads launching for TegraRCM from a Raspberry Pi 3, and has shared his 'working script' for it on GITHub, check it out below:
udev_rule_fusee_gelee_pi3
This scrip creates a script file to run fusee gelee after connecting the switch in RCM mode to a Raspberry Pi 3
Setup Steps on Pi3:
- sudo apt-get install git python libusb-1.0-0-dev
- git clone https://github.com/walac/pyusb
- cd pyusb && sudo python3 setup.py install
- cd ..
- git clone https://github.com/reswitched/fusee-launcher
- cd fusee-launcher/
- wget https://t.co/d5nCLNa7E5 -O fusee.bin
Special Thanks to Team ReSwitched https://github.com/reswitched and Kate Temkin https://github.com/ktemkin for Fusee Gelee http://www.maxconsole.com/styles/def...foro/clear.png)
OFFICIAL SITE: --> https://github.com/Darkmelman/udev_rule_fusee_gelee_pi3
NEWS SOURCE: Fusee Gelee with Raspberry Pi 3 (via) GBATemp
via http://www.maxconsole.com/threads/fu...ry-pi-3.46909/
