Dreamcast SD card reader- need alittle help with drawing

Now I have soldered 10 wires internally onto the serial port pins (same as in pic)
http://img5.imageshack.us/img5/6083/dcserial.jpg

I have taken the following wire/pin layout drawing from the same website as I got the above picture - a Japanese site.
http://img682.imageshack.us/img682/6...lsdcardif2.gif

I just need alittle help with the above drawing - heres how I'm thinking the wires go

serial pin 1 = live - although it dosent need a live does it?
serial pin 2= ??
serial pin 3 = earth
serial pin 4 = to SD pin 7
serial pin 5 = to SD pin 2
serial pin 6 = to SD pin 1 ( and to LED negative?)
serial pin 7 = to SD pin 5
serial pin 8 = (earth)
serial pin 9 = not used
serial pin 10 = live pin of LED? and live pins of 2 capacitors which then go to SD pin 4. (and the negative leg of capacitors go to earth?)

while SD pins 3 & 6 go to earth too.

Is that right? I'm not very good with these types of drawing.

Help is appreciated.

I found this, the replies talk about the serial pins.

http://dknute.livejournal.com/25454.html?thread=706158

also it looks like someone designed one here-

http://f17.aaa.livedoor.jp/~takotako...2bm.php#sdcard

scroll down to the sd card reader.