Printable View
Hi I dont know if any of you can help me.
Im trying to convert a basic .WMV to the Moonshell format (.DPG)
I have tried a variety of different settings, however each time the video ends up jumpy out of time... and basically just crap.
Do you know if there is a certain setting I could try to get the best video playback when veiwed on the DS?
Thanks for you help! :)
These are the settings and program i use:
BatchDPG v1.0
Video-------
FPS:20
Width: 256
Heigth: 192
Bitrate: 128 (can go higher, ive used 135)
Profile: High
Audio------
Bitrate 128
Samplerate 32000
These settings work good most of the time, if theres alot of movement and subtitles at the same time, the subtitles may be a little difficult to read, but you can fix this is you raise the Video Bitrate to 256 and lower the FPS to 15
BatchDPG is here:
http://www.dcemu.co.uk/vbulletin/sho...light=BatchDPG
Also, i think this should be stickied, this question has been asked on several occasions
`/ Edit \'
Just set FPS to 18 and Video Bitrate to 192, seems to run fine for the most part, video lagged maybe a few times, but still very watchable
Hey thanks alot for the help! Theonly trouble is I cant seem to get BatchDPG working.
The files appear to convert correctly and everything is fine. However I cant get them to run when I try and open them in Moonshell.
I dont know if its a problem with Moonshell or with the converter.. Its really annoying. DPGs created through Moonshells default converter work fine (Although as I said before I can never get the quality correct)
Make sure your using the latest moonshell (you probably are) i would also say make sure you have AviSynth 2.5 installed, but since you said they are converting fine you must have it.....hm not much i can do here really..
i have a similar problem when the wmv vid is encoding
audio it gets stuck at 97% and batchdpg freezes
can anyone help?
ps would i need that net framework thingy?