Devhook 52 Installation Guide

Here are some of the files you will need:

3.03 Eboot
Modified PSAR Dumper by Team C+D
PBP Unpacker
Devhook 52

Copy the files inside MS_ROOT to the root of your memory stick.(The same place as the PSP folder is)

Use PBP Unpacker on a 3.03 Eboot and extract the DATA.PSAR file.And save it to somewere easy to find.

Copy the DATA.PSAR file to the root of your memory stick.

Copy the FW3.03 PSAR Dumper (released by Team C+D) into X:/PSP/GAME/. Where X is your drive letter

Run the PSAR Dumper on your PSP and press “X” or the “Cross” button when prompted to.

Alot of writing will appear on the screen.Dont worry about it.It is dumping the PSAR

Run DevHook v0.52 on your PSP.

Select Flash Install.

Select Setup firmware from PSAR dumper.

Read the disclaimer, and press O button if you agree with it.

Once it is done, go back to the main DevHook v0.52 screen.

Select Firmware.

Select Firmware 3.03.

Select Start.

Reboot the PSP.

Load DevHook v0.52 again and start FW3.03.

It should say that the setup information is corrupt (Blue Screen Of Death), just press O

Reboot the PSP.

Load DevHook v0.52 again and start FW3.03.
You should now be able to apply your personal settings to your PSP!

hi there i was wondering if i could get some help. when i go through the "Devhook 52 Installation Guide" , i get an error message when i get to the step of "Select Setup firmware from PSAR dumper." the message reads,

Setup Firmware files from PSAR Dumper output
unknown version code
cancelled
Pres any button to return.

any tips or ideas. i have the fat psp v1.50. please help. thanks for your work. ;)

Man, this is really old
Use custom firmware
first get to 3.52M33