Printable View
since u have flash access via USB through the recovery mode, is it possible to format the flash0 and flash1 and just replace it with a firmware dump? is that safe to do? and can u access recovery mode with any brick, like what if the brick completely formats the flash, then can the recovery mode run?
Why would you want to. I think if you do that recovery wont work nor will PS1 games as they require hacked PS1 EMU
i do not think so i have a 1.50 stuck on the BSOD and can not even open up recovery mode it opened up at first and i ran the recovery eboot and i am still stuck on the BSOD and now cant even open up recovery mode anymore i just wish i reformatted the flash while i had the chance
btw it is my flash 1 that is corrupted
You should be able to get out of that by pressing "O" and resetting everything. It's normal to have that display after a recovery.Quote:
Originally Posted by darthhaze420
it go into the BSOD then goes to a white screen and then reboots the BSOD any 1.50 umd i put in works 100% but i can not get in to my XMB i have tried everything and i am stuck unless i buy a mod chip for that i will just have to buy a new 1 for my wife
your so insane it is very very scary.Quote:
Originally Posted by psp_iz_my_system
but if flash was corrupt enought to require a full re-install...you wouldnt have the means to do so
ok, can someone just answer my question please? is it possible to format the flash in recovery mode and just copy and paste a firmware dump through the usb?? and say u got a psp virus or something that was to format your flash, or w/e, could you still run recovery mode, since recovery mode is in the flash?
no
Insane....
I wouldn't think so, unless it loads recovery into VRAM. Windows might format it it's own way, and corrupt it.