LTU2 Firmware & PCB Launches August 5th !
After a long, hard development we are happy to finally announce that the new LTU2 PCB is shipping to all major retailers on August 5th. Due to the custom nature of the board we have been able to manufacture at a greatly reduced cost compared to the LTU v1 PCB (which is no longer available to purchase). You can now buy an LTU2 for only $49.95 !
http://xecuter.com/ltu2/LTU2-Final-5.jpg
http://xecuter.com/ltu2/LTU2-Final-15.jpg
There are two versions of PCB: Liteon DG-16D5S & Hitachi DL10N
You can also expect a new Jungle Flasher and a new LTU2 fw from C4E.
Official Product Description for retailers:
Do you have a faulty Liteon DG-16D5S or Hitachi DLN10N DVD in your Xbox 360? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled?Team Xecuter have designed new versions of LTU2 PCB for both Liteon DG-16D5S & Hitachi DLN10N.As with the DG-16D4S, the SPI is also locked on these drives (in addition to the firmware being encrypted), so this replacement PCB allows for the user to unlock and re-lock the SPI at will, and offers full ability to write your own firmware to the drive including your own drive key so you are able to replace your DVD drive if it becomes faulty without having to send it away for expensive repairs.
The Liteon DG-16D5S LTU2 & Hitachi DL10N Unlocked Replacement PCB has been manufactured so it is much cheaper than the original LTU PCB – get them while they are available they will be hot sellers !
- Fits all versions of Liteon DG-16D5S (Red Liteon Version)
- Fits all versions of Hitachi DL10N (Blue Hitachi Version)
- Supports the latest LTU2 fw
- Easily programmable using the X360USB PRO V1 or V2 (Update to the latest firmware v20.1)
- Compatible with professional power adapters such as the X360USB PRO V2, CK3 Pro & CK3 Mini
- Requires the latest Jungle Flasher & J-Runner
- C4E's new LTU2 (LT Ultimate v2) firmware now allows booting of any Liteon or Hitachi based system without any previous firmware dump (inc the DG-16D5s 1175/1532 and Hitachi 0500/0502 firmwares) – all you need is the DVD Key and FCRT.bin which can be extracted using RGH or DGX methods.
- Includes solderless quick install adapter
- Includes external SPI unlock/lock switch
- Includes external vendor switch
- Includes heatsink for drive controller IC
- Every board has a unique serial number which can be checked at serial.xecuter.com
- Note: Due to how the custom chipset has had to be designed there is no CD-R support.
This device is designed with the primary purpose to aid and/or assist in the repair or replacement of defective hardware. It does not contain any code or any kind of microchip that infringes any intellectual property.
Fakes & Clones Notice
As always, there are those who try to rip people off by making junk quality versions of Xecuter products and trying to pass them off as their own. They even use the same serial number sticker hundreds and hundreds of times over. Either they are dumb or they think their customers are stupid.
Anyway just to show you how there are so many scams out there, there have been sites already taking peoples money for LTU2 orders – even when they are told time and time again not to.
Here is an example on the awful Alibaba website (CLICK HERE) in China – as you can see there are lots of LTU2 adverts – it's all knock off packaging and every board is actually a DG-16D4S PCB and thats just from the pictures – they probably don't even have those boards in stock and certainly not any LTU2. These will never work on a D5S drive and they will certainly never work with LTU2. Beware folks – always buy from official sources !
http://team-xecuter.com/
