MAP THIS! version 0.461S (beta) with support for PSP-290 GPS accessory

Quote:

---

Originally Posted by nikitenko91

i am trying to see if i can get the map veiwer 4.61s running before i buy the psp-290 accecory, and i did every thing where it goes and when i try to run the appliction i get a (80020148) error, could that be beacuse i dont have the psp-290 accecory? or i got something wrong with the .prx files? please help ASAP. :confused:

---

what firmware do you have?
You MUST have custom firmware (3.02+) by dark alex and make sure you run in under 3.03 kernel

Quote:

---

Originally Posted by dartpsp

Ok got it working ... somewhat.

When I select Address Geolookup my PSP shuts off

But the Reverse Geolookup works.

Also is there a way to remove some of the Zoom levels (to shrink the file size down) The "last two" Zooms aren't needed, all I need is zoomed up to the street name level. Is it possible?

---

There seem to be problems with geolookup function, probably because of some memory problems...
If you use the program w/o the receiver- use non-psp290 version - it's somewhat more stable.

You could "unpack" you map with gmdl tool and remove some of the folder inside 1x,2x.. directories...
The cleaner way would be to select the zoom range for you map during map generation (click on "advanced" button)

Quote:

---

Originally Posted by deniska

The 3.03 prx seem to work best for me.
Dump encrypted ones with C+D psar dumper tool and 3.03 FW ugrade psar

But in general, the only advantage of 3.00+ gps modules is that they would "remember" your latest location and use it for faster startup the next time.
I doubt that they could improve the sensitivity of the unit...

---

thanks for the great help i really enjoy the app and what you are doing for the psp community :) once again thanks!

Pardon me for repeating my question again but I have looked all previous posts and am very desperate to get this to work.

I tried using decrypted usbgps.prx from 3.03FW with usbacc.prx from 2.71FW. It works well in psp290test, getting up to 9 sat-in-view with fixes within 5minutes.

It doesn't, however, work the same way in MapViewer. Can someone help? :-(


Thanks.

Quote:

---

Originally Posted by dcemuUser25

Pardon me for repeating my question again but I have looked all previous posts and am very desperate to get this to work.

I tried using decrypted usbgps.prx from 3.03FW with usbacc.prx from 2.71FW. It works well in psp290test, getting up to 9 sat-in-view with fixes within 5minutes.

It doesn't, however, work the same way in MapViewer. Can someone help? :-(


Thanks.

---

Do you see time running in the satellite look up window inside mapthis?
Do you see any satellites in view in the same window? Also check the gps device status - is it ON or OFF?

In mapthis, the time is running but it is not the right time, i.e. 04/16/2006. GPS state is ON. SAT-IN-VIEW could get to 2 if lucky(with usbgps.prx in campprx) but that's it.

Thanks for replying deniska, appreciate it.

Quote:

---

Originally Posted by dcemuUser25

In mapthis, the time is running but it is not the right time, i.e. 04/16/2006. GPS state is ON. SAT-IN-VIEW could get to 2 if lucky(with usbgps.prx in campprx) but that's it.

Thanks for replying deniska, appreciate it.

---

Well, look like it's just a reception issue with your receiver..
Keep trying.. perhaps find a better/clearer location to get the inital fix...
Try tilting the anntenna see what works best for ya..
Also try changing INITLOCATION value in system/config.txt file

Quote:

---

Originally Posted by dcemuUser25

In mapthis, the time is running but it is not the right time, i.e. 04/16/2006. GPS state is ON. SAT-IN-VIEW could get to 2 if lucky(with usbgps.prx in campprx) but that's it.

Thanks for replying deniska, appreciate it.

---

For Map This! the PRX must be inside the mapviewer folder in PSP/GAME303.

hi, yeah, the prx is inside the mapviewer folder. strange thing is, with the same setup at the same location, psp290test can get a fix on up to 6 satellites while mapthis shows nothing at all..

thx.

Quote:

---

Originally Posted by dcemuUser25

In mapthis, the time is running but it is not the right time, i.e. 04/16/2006. GPS state is ON. SAT-IN-VIEW could get to 2 if lucky(with usbgps.prx in campprx) but that's it.

Thanks for replying deniska, appreciate it.

---

Sorry I'm having trouble with my connection (TAIWAN Earthquake Dec. 27 destroyed optical fibres form Philippines to Taiwan). I just hope I can help. BYE FOR NOW.