did u add the software on the sd card before putting it in the sc?
Printable View
did u add the software on the sd card before putting it in the sc?
when you are getting two white screens, try move supercard just little bit, it will restart and work then. Just noticed it...
Flashing wont work if you can't get to load the update first, right?
those supercards are usefull but poorly assembled. I had the same problems when i got it this morning. Did the same thigh right out the box.
I looked on the internet for a fix without success. Then i remembered when i was younger, i use to remove the pin that detect floppy as 1.44 or 720k to read all floppy as 1.44. Anyway, sd are not so different in this way. So i tricked the SD to think that all sd will be unlocked. So i just shorted(connected) the first pin of the sd holder (the one that are pushed by the sd plastic pin) to the ground (i think is the ground) of the sd holder and it worked:
http://img154.imageshack.us/img154/5...connectzr1.jpg
That trick should work with lock tab too.
Hope it help!