EBOOT loader v0.9 for PSP Firmware V2.0

Printable View

Show 40 post(s) from this thread on one page

December 26th, 2005, 17:56
toddev

Stella

Will Stella - the atari emu run under this version or does the kernel mode not allow it to?

Thanks if anyone knows!

-todd
December 26th, 2005, 21:13
scarface350

Quote:

Originally Posted by albadross

Yes, I have been using PSPRadio all day on my 2.0 PSP.

You have to use what is becoming known as the "Wi-fi Loader" Trick. It is explained in full in the readme notes with v09 of the EBOOT loader.

You will find various other help on forums elsewhere that may be useful.

There is a definite knack to it that - like a lot of puzzles - is easy to understand when you find the solution.

But keep persevering - you will get there in the end. Just follow the instructions to the letter. The last thing you have to do is test your connection via network settings - when it says successful, give it a three-fingered salute (Shoulder Left + Shoulder Right + Select). This will take you directly to the v09 EBOOT loader screen with the Wi-fi connection intact, where you can select your PSPRadio program.

BTW Your PSPRadio program should be set to autoconnect beforehand (if you want a smooth ride).

Good luck,

David

WHICH PSP RADIO YOU USING??????
December 27th, 2005, 01:13
albadross

Quote:

Originally Posted by scarface350

WHICH PSP RADIO YOU USING??????

Current one. Version 0.37 -pre8 works fine.

I know when I was struggling to get it to work, Fanjita's config file mentions a much earlier version. I tried that version with no joy - but that was before I had worked out Wi-fi loader method.

When I finally got a stable wi-fi connection, I was trying with 0.37 -pre8 and hey presto! it worked.

Obviously, I would recommend that you try with this version if you can get it.

Regards,

David
December 27th, 2005, 06:34
snowball622

i need help it loads ok then says Found suspicious hard path .but i dont know where to put the application folder

please help
December 27th, 2005, 06:39
scarface350

Quote:

Originally Posted by albadross

Current one. Version 0.37 -pre8 works fine.

I know when I was struggling to get it to work, Fanjita's config file mentions a much earlier version. I tried that version with no joy - but that was before I had worked out Wi-fi loader method.

When I finally got a stable wi-fi connection, I was trying with 0.37 -pre8 and hey presto! it worked.

Obviously, I would recommend that you try with this version if you can get it.

Regards,

David

ok i got it to work but pre8 has this problem when trying to switch to your playlist( it freezes) so i got pre 7 is tha same thing cept it doesnt freeze. :cool: thanks!!!
December 31st, 2005, 04:07
gummybears

is there any psp emulators that works as/for GBA on version firmware 2.0 ? because it seems it dun work on loader 0.9.....or i just did something worng? :confused:
December 31st, 2005, 09:26
nuclearpenguins

Yeah I got a 2.00 for Christmas, hurray!

Quick questions though, if I install this will all my normal retail functions still work correctly and if I try to play a legally bought multiplayer game over Sony's network could they find out?
December 31st, 2005, 19:13
acn010

yay.................its more stable and little more functional and also the wireless function.........yes...............
but the problem is the turning off thingy..............
January 1st, 2006, 09:59
ctlfreak

@snowball the zip contents should be extracted straight to the root directory of your psp. it will put everything in the right place, the error your getting is something ive never seen before. are you sure your running 2.0 any other version and it will not work
Files should go accordingly::
\PSP\PHOTO\EBOOT Loader 09\RUN_L09.TIF
\PSP\PHOTO\EBOOT Loader 09\AAA.GIF
\PSP\PHOTO\WIFIBACKGROUND.PNG
\PSP\PHOTO\WIFI Loader\READY.PNG
\PSP\PHOTO\WIFI Loader\LOADER2.TIFF
\UTILS\EBOOT_SIGNATURE.EXE
\PSP\GAME\LOADER09.CFG
\PSP\GAME\LOADMENU09.PBP
\PSP\GAME\LOADMENU.TGA
\L_09.BIN
\A.BIN
\TSR.BIN

@ gummy no, gba will not work, you did nothing wrong

@ nuclearpengiun, nice name btw yes and no respectivly everything still works fine, this runs off a seperate thing and when its shut off it will reboot the psp. this is an image on your card, literally its a tiff file so its not something that sony will detect, they dont even do anythign of the such to my knowledge anyway. games themselves would be what determined if it were pirated

@ acn i dont see why, if you shut it down properly it takes seconds. you must be trying to cut it off with out exiting, then yes it does you need to hold the switch for like 30 secs it seems
January 1st, 2006, 22:08
doomgaze

As for gba emulators in 0.9, the PSPGBA emulator runs, but not sure if you can load any roms. Everytime, I try it crashes and reboots on me.

So just wait for an update to the emulator :)
January 2nd, 2006, 00:48
Nono-O

Please work on the UMD-Emulator PLEASE
January 2nd, 2006, 06:01
acn010

Quote:

Originally Posted by ctlfreak

@ acn i dont see why, if you shut it down properly it takes seconds. you must be trying to cut it off with out exiting, then yes it does you need to hold the switch for like 30 secs it seems

I know that.... but that is reseting the system, im trying to say that why it doesnt turn off normally? Just with one push of the off button (not holding)

Well.............at least he did a great job with the program
January 3rd, 2006, 13:44
BONDIE007

Mong

[FONT=Garamond]OK IM A MONG AND HERE IS WHY I GOT MY PSP FROM HONG KONG :D THEN GOT SOME DOGEY GAMES N MOVIES OFF E BAY NOW MY PSP WAS V.2.0 BUT IVE DOWNGRADED IT TO V.1.50 :confused: TO PLAY THEM AND GEUSS WHAT IT DONT F*CKIN WORK ME BEING A MONG ? :confused: OR SHIT STUFF :confused: BUT I WOULD REALY LIKE SOMEONE TO HELP ME OUT HERE PLEASE AND IF YOU CANT COULD YOU REFURE ME ELSE TA :D
January 7th, 2006, 01:51
fustin_aoe

Is anyone else having trouble getting PSPGBA to work? I can get the GBA loader up, but whenever I try to run a rom it just shuts my psp off.
January 10th, 2006, 02:36
slaphappygamer

Quote:

Originally Posted by Nono-O

Please work on the UMD-Emulator PLEASE

i 2nd that
January 10th, 2006, 02:55
Produkt

Slap happy and Nono-O go ahead you will join millions of other people helping the Homebrew scene get itself a swift kick in the crotch making a new firmware... required for games
January 11th, 2006, 19:05
Voltron

This Loader is simply amazing. Fanjita is awesome. With what this loader can accomplish and the fact that it is still a work in progress, I don't think the PSP will ever get old. It has new life breathed into it almost daily due to the strong dedicated homebrew scene. There are now articles in the mainstream such as GamePro magazine that talk about homebrew on the PSP and the the good that has come from it.

Anyway, keep up the great work Fanjita. My sincere gratitude goes out to you.
January 12th, 2006, 12:18
jangosolo

Allo

Stupid question, but will this run emu's or not? (On a 2.0 firmware) and can anyone tell me how much space I would need a memory card to run eboot and say the snes emu and a game?

Thanks for your help
January 12th, 2006, 17:33
blaster_boy

@jangosolo :

SNES emulators run on 2.00.

Amiga (PSPUAE) and Gameboy emus don't (for the moment - there's always hope !).

You don't need much space - I think even a 32 meg card would suffice for the eboot loader, the SNES emulator and a game or two plus your regular UMD game saves and a jpeg magazine or two.

A rough guestimate is between 3 and 6 mb total depending on how many snes games you want to put on it. The games I have are between 1.5 and 3 meg. The eboot itself is not even a meg alltogether.
January 12th, 2006, 18:23
hockey2112

Quote:

Originally Posted by blaster_boy

@jangosolo :

SNES emulators run on 2.00.

Amiga (PSPUAE) and Gameboy emus don't (for the moment - there's always hope !).

You don't need much space - I think even a 32 meg card would suffice for the eboot loader, the SNES emulator and a game or two plus your regular UMD game saves and a jpeg magazine or two.

A rough guestimate is between 3 and 6 mb total depending on how many snes games you want to put on it. The games I have are between 1.5 and 3 meg. The eboot itself is not even a meg alltogether.

Do you mean Gameboy Advance don't work? Because I have Gameboy/Gameboy Color working on my 2.0 with Fanjita's loader. You can find the GB emu listed in Fanjita's list of working eboots (it is called RIN (GBC) 1.32 )

You are right that you do not need much space. I am still using my 32MB card, and I have NES, SNES, GB/GBC, Genesis, SMS, and Game Gear on it with a few games for each.
January 12th, 2006, 21:38
blaster_boy

Quote:

Originally Posted by hockey2112

Do you mean Gameboy Advance don't work?

Yes, the GBA emulator - I didn't know the Gameboy emus like RIN worked !

Thanks for the info.
:)
January 13th, 2006, 10:06
jangosolo

Thanks for your help, followed the instructions (checkled out fanjita's excellent compatibility chart) and it all worked first time, great piece of development!

The only thing I am unsure of now is some of the emus don't seem to have exit commands and I have to hold of the off switch for 10 secs - is this right? Its not a massive problem but I was curious...
January 13th, 2006, 17:16
Jaeboy

tested?
January 14th, 2006, 17:38
a-break

whats up could someone help me with this. how in th e**** do i put it in my psp i have no idea.and how would i add a game. where could i download games for free. please answer fast oh and what could i do to add videos i have psp video 9 but it dosent read my psp. thanks
January 15th, 2006, 20:37
blaster_boy

@jangosolo

I have the same problem to quit - sometimes it works when you press 'home' for a few seconds and wait. Other times it worked with L+R+Start, but the best results (getting back to eboot loader) I get with pressing home several times and waiting.
January 21st, 2006, 13:24
phyo09

Can someone tell me ,

pls tell me where can i download free psp game..and can give me a guide for eboot loader......

mine is v2.0 :confused: :confused: :confused:
January 21st, 2006, 17:47
K1LL3R833

i'm wondering can you play any games with it since it sais this:
Can't run kernel-mode applications.
- That means anything that uses wi-fi or USB access, or emulates ISOs/UMDs.
- Some minor system calls are still unsupported.
January 21st, 2006, 23:19
Xan

Quote:

Originally Posted by K1LL3R833

i'm wondering can you play any games with it since it sais this:
Can't run kernel-mode applications.
- That means anything that uses wi-fi or USB access, or emulates ISOs/UMDs.
- Some minor system calls are still unsupported.

Atm like 80-85% of homebrew runs on 2.0 with this loader.Not bad imo.
Take into fact that is 0.9 version and fanjita still works on it so in near future all system calls will be suported.For wi-fi homebrew there is wi-fi loader.
January 22nd, 2006, 09:00
blaster_boy

I would really like for uaepsp to run on 2.0 - the amiga emulator. Heard some people say that it almost worked, but not for me.

Lets hope that the next version of Fanjita's eboot loader fixes that.
January 26th, 2006, 02:08
LAMPRO

SO can i upgrade to 2.0 and use this emu for all the iso's and loveliness of my 1.5 , with the added features of the 2.0?? exciting- or should i just leave it at 1.5-- whats the big difference? any comments??
January 26th, 2006, 02:52
Festizzio

Quote:

Originally Posted by Xan

Atm like 80-85% of homebrew runs on 2.0 with this loader.Not bad imo.
Take into fact that is 0.9 version and fanjita still works on it so in near future all system calls will be suported.For wi-fi homebrew there is wi-fi loader.

I couldn't get the wifi loader to work. When I opened the folder it just froze, I tried restarting it, but it still wouldn't work.
February 3rd, 2006, 08:18
nightcrawler420

helpful hint

before you run the choice package start a video that on you memory stick first for about 10 sec. the start choice package now it shouldnt act as if the up button is being pushed down only flaw is now pushing R1, L1 & start does not work but on the plus side you have full access to the menu
February 9th, 2006, 15:42
{wdc} twisted

i need help, i keep downloading the snes Game Emulators for my psp and it keeps cumin up with corrupted data, wot can i do?
February 14th, 2006, 06:04
tylerman

so I can use snes9x under the gta mod but I can't use nesterj but if i use this mod I can use nes but not snes9x whats up with that

does anyone else have these problems?
February 14th, 2006, 12:02
Bradbiss

Just Freezes!

Quote:

Originally Posted by Festizzio

I couldn't get the wifi loader to work. When I opened the folder it just froze, I tried restarting it, but it still wouldn't work.

Hello, Not sure if the above quoted post is what i'm suffering from.

no one (except the 'big boys') seems to be outlining their problems in full for these good people to help you out.

OK! Firstly, i followed the steps in this thread to position the whole contents of the EBOOT loader v09 to the root directory on my memory stick. Replacing any files it says there are duplicates of with the same name.
(namely the PSP folder - yes i backed it up 1st!)

So i now have a memory card with various files on it (ALL from the eboot loader v09 zip file)
files include -

\PSP\PHOTO\EBOOT Loader 09\RUN_L09.TIF
\PSP\PHOTO\EBOOT Loader 09\AAA.GIF
\PSP\PHOTO\WIFIBACKGROUND.PNG
\PSP\PHOTO\WIFI Loader\READY.PNG
\PSP\PHOTO\WIFI Loader\LOADER2.TIFF
\UTILS\EBOOT_SIGNATURE.EXE
\PSP\GAME\LOADER09.CFG
\PSP\GAME\LOADMENU09.PBP
\PSP\GAME\LOADMENU.TGA
\L_09.BIN
\A.BIN
\TSR.BIN

I then put the memory stick into the PSP,

start it up as normal (no UMD) and the start up screen appears, followed by the PSP menu screen.

Now i have ALL this stuff on my memory card and no way of using it??

i go over to the 'photo' menu, click 'x' and then the memory stick light illuminates and stays illuminated. And the whole PSP stops responding (crashes) Then after 10 seconds of displaying these symptoms the PSP turns itself off.

+++++++++++++++++++++++++++++++++++++++++++++++

goes away for 10 mins or so.......

Ahh!!!! Right i'm back!!

managed to get it to work, just deleted the Wifi loader folder from the EBOOT loader 09 folder, under PSP, Under PHOTO. Stupid folder stopping my PSP from even displaying the loader app under the PSP's photo menu.

Right... Now, i have a functioning Megadrive Emulator (PSP Genesis) except there's no sound. can anyone tell me how to get sound working on this?? any config menu's that i can access?? either from the PSP or a computer?? i've noticed that the Megadrive Emulator is all is chinese writing. quite annoying i can say.

any help would be greatly appreciated.

thank you very much!!
February 14th, 2006, 12:36
darkknightsabre

Quote:

Originally Posted by Festizzio

I couldn't get the wifi loader to work. When I opened the folder it just froze, I tried restarting it, but it still wouldn't work.

Same deal. Following the readme, I loaded up wifiwallpaper (by pressing x), and end up looking at a black screen with a few blue pixels. :confused: I then restarted the system, opened the folder and it froze.

After rebooting, then loading wifiwallpaper as the background, i notice if I press home I can see that wifiwallpaper is active, :confused: It has a swirly thing next to it.. I open wifiloader folder (again) and bam! Frozen.

I guess multiplayer-psp-smash-tv is gonna have to wait... ;)
My emus all work sweet, with or without wifi this is a brilliant homebrew app. Excellent work.
March 4th, 2006, 03:48
delayebdird

u cant have some things like run homebrew apps that use kernel mode
March 4th, 2006, 03:50
delayebdird

open eboot in photo then smash tv'll work

Show 40 post(s) from this thread on one page