well it is spring break
Printable View
well it is spring break
Quote:
Originally Posted by PSP Halo2
what's this got to do with the price of fish??
i can only assume you're saying that being spring break the servers might get quite full :confused: but they havent yet.
more testing, and imho these new settings are rubbish compared to the old ones.... the *only* good thing is the extra chat menu.
i'm now gonna sit here and try and make a super-hybrid of the two :rolleyes:
I just imagined myself playing halo on the psp.....................
I see the list of four and i can go on to them, but it says the graphics will not load or something like that, so it is impossible to play. With me anyway, anyone else with the same problem?Quote:
Originally Posted by Hungry Horace
ok I did everything that the instructions said to do...and I got nothing all that shows when I start up my eboot is my snes emulator
What firmware have you? Just read the readme. Its so simple. Two steps and its in. Put the quake file that contains the id folder in the psp's game folder and then put the corresponding firmware eboot beside the id file in the quake folder.
ffs... have you tried hitting select on the eloader menu? it refreshes the eboot list you know.Quote:
Originally Posted by xbloodsportx
and back on topic... i'm declaring this release officialy "Hungry Horace's most pointless release" award. i mean seriously, it adds nothing and the default config is horrible. Some great default "features": bad key layout, no on screen display, poor use of ASCII to represent psp buttons etc etc.
I went back to the old configs and managed to create my own menu system for multiple preset chat texts in about 15 minutes (it's really not that hard if you have a look at the files in wordpad) - and now i can have as many chat messages as i like! - and that had been the only good thing about this release. (and no i'm not some quake-head who knew all the config stuff already - i hadnt played the game in 8 years until 3 days ago - and had never done any editing on it) i would do the same to create multiple server menu's too, but i really dont see the point when the ones on there are fine for me anyway.
i suppose it does include the shareware version at least, but anyone could download that from somewhere else anyway.
Great release dude, its made it alot easier to get onto a server. It does take a second though for my key presses to actually do something. Lag or something. Anyone else get this small problem. Cheers anyway dude.
Yeah i know what you mean. Although this can be fixed by overclocking the psp to 333. Still though the key presses in infrastructure mode have the lag. Maybe this will be improve in the next release. Then quake will be the best thing to load on the eloader. It really is a great port too.
ok, i have 2.0 and im getting the CL_CONNECT ERROR....can someone please post a link as to what i have to downlaod to get it to work. I made a new connection with the defualt name (Connection 1).
EDIT:::Finally got it working....
I connected to teh Shareware CTF server...but then nothign happens...it jsut sits at the connect screen, what do i do now?!??!?
Also, i cant join other server since i need the PAK1.PAK file....sucks
well i got it to work thank you for the help...
Def. one of the best things out so far for psp users with 2.6+
Does anyone know why it just sticks at the connection screen after it says i successfully connected to the shareware server......?????
I dont know why exactly.
Ive set up a hundred networks wireless and otherwise.
But for some reason.
I cant connect to server.
Look I know this sounds stupid.
But can somone give me a run down of the processes I need to go through to get this thing going online?
A little background*
Its a psp firmware version 2.0
im useing the new bock that actuelly works on 2.0 psp's
And im very pissed off that I cant get this going :(
There must be somthing I missed :cool:
I see a lot of people haveing simmiler problems maybe theres still a bug in the whole 2.0 thing,
I cant get connected to the shareware server at all :(
Any help at all would be appricated :(
this game is great i never played Quake till now and its awsome i havent tried the wifi play yet but i will as soon as my buddy lets me put it on his psp haha and best of all it works on 2.6 firmware
i have downloaded quake2 full for pc.the pak0 file is 180mb i copied it into the id1 folder and started the game.then comes an error mesage in red
pak0 have 3307 files
press cross to exit.
help!
http://thegang.junik.lv/downloads.htm
@ ShadowProphet
hey dude,
your network connections under the main psp setup... are they with a set IP / DNS number or with auto IP?
For some reason i can only get the homebrew wifi running if i put it on auto-ip.... not sure why, but it works for me.
as a result i have two settings; "Home" (defined ip) & "Auto" (auto ip) - it gets a bit annoying that quake defaults to my Home connection, but under the mutliplayer settings you can change this.
---- more help for anyone ----
a little low-down or starting out the game, (since i havent seen this on here, and it might help some people out) because i've seen a lot of people get confused over the multi/single player issues (not saying you need this help ShadowProph' - i'm just trying to help some peeps out)
1) load quake
2) goto Multiplayer; Setup; Access Point; "Auto" or similar (use left/right)
3) Circle (back to multiplayer menu), Switch Infrastructure On (wifi LED should go green)
4) Circle (back to main Menu) and goto Single Player mode and start a new game
5) hit select until you get to your Server menu, select pspquake server (square usually) and hopefully it will connect!
6) Get pwned by Hungry_Horace online... hehe :D
hope to see you online soon ShadowP'. ;)
probably because you downloaded Quake 2 and this eboot is for Quake 1.Quote:
Originally Posted by Stealth Kill
Thank you bro :p actualy that was exactly the help I needed:pQuote:
Originally Posted by Hungry Horace
The mistake I was makeing was I was going into multiplayer and trying to join a game that way lol
I feel like such a noob now :D
That'll teach me to start reading those readme files more often :o
thanx again bro I tried it an I can connect I hope to run into you soon
You cant miss me im my name will be as it always is Shadowprophet :D
*update
Thanx again Hungray horace I just finished my first succesful match in witch I got totaly owned lol But I still had a blast tho :p
*new update
Some guy named devilman was really helpful in teaching me some of the ropes to quake 2. yeah yeah i know quake 2 is old and i did play it a lot in its hay day. But I didnt know the axe could be used to grapple. Thats a nice feature :D
So a salute to devilman who ever he may be and if you run into him fill him full of lead for me :D
peace out ppl :p
no probs my friend.... just a day in the life of a Hungry Horace ;)Quote:
Originally Posted by shadowprophet
at 600+ posts i think you're safe on that one.Quote:
I feel like such a noob now :D
hehe, ditto. Even on Quake i *have* to be Hungry_Horace... and yes, i *have* to be Blue too!Quote:
I hope to run into you soon
You cant miss me im my name will be as it always is Shadowprophet :D
Please cut off your testicles and then and choke yourself to death, you warezing scumbag.Quote:
Originally Posted by Stealth Kill
Kind regards,
Pete
Oh my word peter...Quote:
Originally Posted by PeterM
agreed.
Tried to play Multiplayer with laptop - got stable Wi-Fi connection (11Mb/s), but Quake doesn't see server on both devises! Tried different ways to make it work - hosting server on PSP & Laptop, different Quake PSP-ports with multipayer (V1.1, V2, V2+GP), different PC Quake Ports (original GLQuake, DarkPlaces, joeQuake, tomazQuake and QW - orig, ZQuake, fuhQuake...), different multiplayer settings (AdHock/Infrastracture), typing IP adresses myself and so on, but couldn't solve the problem! Help, anybody!
im a 2.5 psp user i i cant get it to work it says corroupt data when ill try to run it :S
You can't run it using the PSP system menu on your firmware. You need to use Fanjita's GTA exploit on firmware newer than v2.00.
ohh where do i get that ??
http://www.fanjita.org
Please read the instructions.
am i right or do i need GTA liberti city stories to run all the Homebrews ???
afaik theres also some tiff-pic-method.
but i dont have a clue if this is working with 2.5
edit: wont work with 2.5. get gta :/
dran hmm i got v 2.6 now... will it work there ???
i dont got money for gta this month :P
It will work on 2.6 (that's what I use), but you will need GTA.
Works on 1.50 as homebrew.
Works on 2.00 with TIFF eloader -- www.fanjita.org
Works on 2.01, 2.5 & 2.6 with GTA eloader -- www.fanjita.org
oNCE I GET CONNECTED USING THE JOIN SERVER THING IN SINGLE PLAYER....HOW DO I PLAY? ALL I SEE IS A CONSOLE LOOKING THING
Quote:
Originally Posted by chaos-is-me
Yeah can u help us the same thing is happening to me. I can connect to the server fine, but all that happens then is that i see loads of people chatting. What are we supposed to do please help. I can't to play such a decent hombrew online!
http://www.dcemu.co.uk/vbulletin/showthread.php?t=29746
go here, I am sure Gangsta_psp will help you.
I think I can help here too:)
WAT OTHER GAMES WORK ON 2.6 WITHOUT HAVING TO HAVE GTA LBC, cuz its a long tin buyin it nd den doin everytin else, jus wnt a homebrew game or sumtin 2 work on 2.6 widout all da complications.
sum1 help me plz????????????????
Recker
How can i use the pak0 from the full game. I replace the pak0 in the quake folder and then when i load it up i have to restart my psp.
Figured it out, my own fault.
sweet
sweet does this work on PSP slim? or only on PSP Phat ? because i have cfw on my slim and on phat but id rather play on slim lol