Is the port 5000 open in your PC firewall ?
Is the port 5000 open in your PC firewall ?
i have disabled the firewall
Can you post you ipconfig /all ?
Or check your PM for my msn
hello!
i have a problem, whe i run the savesender.dns in the NDS it freezes and only say :
Welcome to savesender 1.1! and do nothing.
the yellow led of the wifi connection on the ds is flashinf but nothing happens
i have an r4
someone help me plz
thanks
Abbathorn
I am having the exact same problem, the odd thing is I've used savsender with no problem on my R4 before.
I've tried everything I can think of:
Let savsender run in its frozen state for about 10 minutes
Re-DLDI patched
Removed EZ Flash 3-in-1 from slot 2 (just in case)
Reverted to 1.09 R4 kernel
Took everything off the SD card except _system_, _DS_MENU.nds, and savsender.nds
Reformatted the SD card
Put the original savsender file from the original .zip, just in case mine had gotten corrupted somehow
Removed EVERYTHING off the card, put back only _system_, _DS_MENU.nds, moonshl, _DS_MSHL.nds, savsender.nds, and the DATA folder
Restarted savsender about 137897597934 times
The green led that normally flashes when the DS is in WIFI is flashing like it should, but the program is definitely frozen. The R4's soft reset doesn't work.
I really don't understand, because like I said, I've used savsender on this same R4 and SD card before. I don't know why it's suddenly freezing. Anyone have any answers? Please? Thanks in advance!
EDIT: I tried putting my R4 in a different DS. When I loaded savsender, it said "Cannot connect to the AP!" I configured that DS's wifi settings to connect to my router. I retried savsender, and now it freezes after the "Welcome to SavSender 1.1!" just like before. I'm going to borrow a friend's R4 and try that later.
EDIT 2: Different R4 didn't help. Gave up and just used eepinator.
Hi,
I'm from France and have the same probleme with savsender-1.1.nds as Siesna and Abbathorn
I have a ds lite + m3 simply + 2Go µSD.
In the root of the µsd i have DATA folder in witch i put SETTING folder with savsender.conf file (192.168.0.2 and 12456 port open in the router)
Also in th root I have savsender-1.1.nds.
when i launch it i have the message "welcome to savsender 1.1!" and nothung else. Black screen down and white screen up.
can any one help me
My Ds is a new one v5 (magenta screen)
THX
Hi,
I'm from France and have the same probleme with savsender-1.1.nds as Siesna and Abbathorn
I have a ds lite + m3 simply + 2Go µSD.
In the root of the µsd i have DATA folder in witch i put SETTING folder with savsender.conf file (192.168.0.2 and 12456 port open in the router)
Also in th root I have savsender-1.1.nds.
when i launch it i have the message "welcome to savsender 1.1!" and nothing else. Black screen down and white screen up.
can any one help me
My Ds is a new one v5 (magenta screen)
THX
I made a try with an old DS std and it works with the same µds and the same M3 simply.
In an another forum the told me to wait a new update of savsender wifi librairy for newest DS Lite.?????????????
i tried and it worked, ds lite, 1gb micro sd, final fantasy III and an r4 thank you very much
anyone have a link to the guide on how to use this? The link in the first post isnt working...
http://www.scdev.org/forum/index.php?topic=9915.0
Just change the .info to .org.
The program works great. Only problem is that it's as slow as hell, but you're trying to extract a 512kb file from a card and transfer it over a wireless connection using a portable game device, so how fast do you expect it to be? It would also be really cool if the program could extract the entire game ROM.
I'm having a bit of trouble with the resolving host part.
Also, do you enter your computers IP? I'm using my routers IP.
From my DS:
It gets stuck there and won't budge.Quote:
Welcome to savsender 1.1!
Connected to AP.
Opening config file...
Server is at 192.168.0.1
5000:0...
Press A to dump, or B to restore
.
Detected EEPROM of type 3, size
262144
Reading 262144 bytes from EEPROM
...
Resolving host...
...Help?:(
Hmm...
When I run the program it says..
Resolving host...
Resolved to 208.69.32.137
Connecting to server....
Error!
Sending EEPROM contents....
And then it does that forever.
I have the conf file setup:
192.168.1.01 (my computers ip)
5000
I have port forwarding setup to send to 192.168.1.101.
When I run the progam it creates the save file on the desktop but it remains 0kb forever. I have no idea what I'm doing wrong.
what server are you using? netcat, savreceiver or savsender server?
netcat
In your case it might pay to try a different one, but with mine... well, I don't really know, but mine has nothing to do with the server.
WillWil56, you need your computer's IP, not the router's. pizzatacoman, no clue, try SavReceiver I guess.
Thank you! An actual answer instead of "Go back and read the instructions!".
Edit: Changed it to my PC's IP, still nothing. I might need help with the port opening/forwarding bit.
I have Dial-Up if that changes anything for port opening.
And hopefully there is someone out there kind enough to reply within the next hour!!!!!!!!!!!!
Edit Again: Sorry about the double post below, the server hid this post so I posted a new one and this one magically appeared!
[Deleted]
Nvm... should have read the posts
I was also getting the "cannot connect to AP" error. I checked and rechecked everything and was convinced I had done everything right. So after some more searching, I finally solved my problem. The solution for me was locating a newer version of Savsender version 1.1b. Here is the link that led me to it.
http://frodo.dyn.gno.org/~brettk/savsender
I've done it with both Savreceiver and Netcat. Either way works. Here is my setup:
- Cobalt Blue DS Lite
- Supercard DSone HC (slot 1)
- Nothing in slot 2
- I am using my computer's IP, not the router's.
The process goes like this:
- Run Savsender from the flashcart
- At the "press A" prompt, remove the flashcart and put in your DS cart without turning off the power.
- Run Netcat (or Savreceiver) on the PC
- Press 'A' on the DS.
The file will then transfer. Took about 30 seconds for the first game I tried. The second one took 4 seconds.
Darryl
Thanks!