cfw 3.71 & mapthis?

Printable View

Show 40 post(s) from this thread on one page

September 29th, 2007, 19:38
deniska

Quote:

Originally Posted by coach777

Here is the version of PRX files for firmwares:
3.52M33 (fat)
3.60M33 (slim)
3.71M33 (fat\slim)

BTW, all this "additional prx files" nonesense is going to be gone in the next official release (thanks to Nieko's hints)
September 30th, 2007, 04:22
the_troll

Man! I can't wait. When do you think this will be out Deniska.
September 30th, 2007, 13:46
ChazB

Quote:

Originally Posted by deniska

I am still in the process of figuring out the new pin layout..
I posted a little serial comm test program (just source code) at ps2dev forums which should work in 3.71.. so if anyone feels like contributing - feel free to compile and test it (playing with new psp-remote cable plug)...

From what I understood, the pinouts were the same, just the connectors were different. I could be wrong though.
October 2nd, 2007, 01:44
waichai

can someone confirm about 3.71 M33 + 1.50 kernal fat psp working with holux gps? since the 1.50 kernal is out. i want to make sure before i upgrade mine.
thank you
October 2nd, 2007, 02:53
specialist83

am using Neiko's version on my 3.71 M33 phat PSP and it worked like a charm...

didn't have to care about the prx files at all...but if the older prx will have worked better or not tis i wun be sure...
October 4th, 2007, 18:47
asics64

Quote:

Originally Posted by specialist83

am using Neiko's version on my 3.71 M33 phat PSP and it worked like a charm...

didn't have to care about the prx files at all...but if the older prx will have worked better or not tis i wun be sure...

hi,i am having a 3.71 m33-2...i place my mapview in the game folder 3.71 and the prx from my old 3.52 version but it does not work...so can u provide me a short list of wat u have done to get it working?and do i have to set the kernel to 1.5 as i also install the 1.5add on
October 5th, 2007, 07:14
coach777

Quote:

Originally Posted by asics64

hi,i am having a 3.71 m33-2...i place my mapview in the game folder 3.71 and the prx from my old 3.52 version but it does not work...so can u provide me a short list of wat u have done to get it working?and do i have to set the kernel to 1.5 as i also install the 1.5add on

Replace PRX files...
Kernel 3.71...
http://www.dcemu.co.uk/vbulletin/att...2&d=1190787195
October 31st, 2007, 00:30
cgiorgi

Hi pleaseeeee step by step , tutorial for psp slim 3.60 m33 !!!!!
November 1st, 2007, 09:14
PDG

Quote:

Originally Posted by cgiorgi

Hi pleaseeeee step by step , tutorial for psp slim 3.60 m33 !!!!!

Follow my tuts, but i think 3.71 M33-2 would be a better FW to try getting it to work on.

Do a little searching in the forums.
November 2nd, 2007, 22:39
eminded

3.71 m33-2 and mapthis .501 works flawlessy make sure to chekc ot my signature..
November 5th, 2007, 10:19
PDG

Quote:

Originally Posted by eminded

3.71 m33-2 and mapthis .501 works flawlessy make sure to chekc ot my signature..

Just looks like a bunch of spam sites that you get credit per click from users.

NO THANX dude. :mad:
December 15th, 2007, 20:27
thezarik

Hello!
I have searched this PRX files in my flash0 and I haven't found it. I have a fat psp with firmware 3.71
Before, I have my psp on 3.40 and the mapthis worked properly but now, without this prx files the mapthis don't recognise my GPS-290. Someone could upload the prx files in the flash0??? Thanks for your atention. Write me soon. Regards!!
December 15th, 2007, 23:53
ich²

Use the new Mapthis Holux. You don´t need the 2 files.
December 16th, 2007, 07:15
Nieko

ich² means version 0.5.05 or higher, which indeed don't require you to extract PRX files anymore. You still do need the PSP-290/FW3.xx version, not the Generic/FW1.00 version. (The latter is for use with Holux devices on fat PSP.)
December 16th, 2007, 09:05
thezarik

Is it normal that I don't have this files in my flash0??
December 16th, 2007, 09:30
Nieko

That's not normal, every new firmware should have them. Map This! may also not work properly with PSP-290 if those two files (usbacc.prx and usbgps.prx) are not present in your firmware.

If that's the case, you should reconsider reinstalling your firmware.
December 16th, 2007, 11:13
accuracy

Is it normal that it takes me about 20 minutes to get a lock and decent satellite tracking on my PSP?

I have psp290 , 3.71 m33-4, w/ v5.20
December 16th, 2007, 11:58
Nieko

20 minutes is really long, but it does depend on your location and speed. It seems you get the quickest fix outside with plenty of visible sky while standing still. Moving faster or indoors will take longer, if you get a fix at all.

If all fails, you could buy an extension cable from PC Mobile, it works wonders :). I used to get fixes in 3-4 minutes (using PSP-290), that's now down to 30-40 seconds.
December 16th, 2007, 20:30
accuracy

Quote:

Originally Posted by Nieko

20 minutes is really long, but it does depend on your location and speed. It seems you get the quickest fix outside with plenty of visible sky while standing still. Moving faster or indoors will take longer, if you get a fix at all.

If all fails, you could buy an extension cable from PC Mobile, it works wonders :). I used to get fixes in 3-4 minutes (using PSP-290), that's now down to 30-40 seconds.

what do you mean by extension cable? you mean like female miniusb to male miniusb sort of thing?
December 17th, 2007, 05:09
Nieko

Yes, see http://www.pc-mobile.net/pspue1.htm.

Show 40 post(s) from this thread on one page