Да а что ты убрал ГИБРИД гуугле из программыQuote:
Originally Posted by in7ane
я тут Москву щас делаю правда в версии 12 :)
Printable View
Да а что ты убрал ГИБРИД гуугле из программыQuote:
Originally Posted by in7ane
я тут Москву щас делаю правда в версии 12 :)
Hybrid vse escho tam - viberi Google Sat i potom (nishe) Overlay: Google Hybrid. Tak moshno skleit raznie sat i dorogi.
In7ane, do i see a little sneak preview of you 4.18 there ?
It's russian or turkish but i can see a link hehe....
А все нашел..только в 12 версии мне больше нравится ..там прям сразу качается гибрид фото с улицвами и домами...а в новых както замороченно...Quote:
Originally Posted by in7ane
Недавно выяснили что город Пермь криво привязан в Гуугле метров 20-30 прикинь...
Хотел откалибровать ее..да вот не знаю как засунуть ее обратно в мапкранчер..
Хотел сделать фотку через твою прогу - но получается 10-15 кусков больших..при соединении в фотошоп там чето кажет под 3 гига и комп не тянет уже...хотя мощный..
Еще подскажи а нет ли у тебя в тайнике гденибудь программы способной выкачивать обычные (без gps) интерактивные карты городов просто в PNG либо BMP? Просто их столько развелось было бы не плохо...
I faced with a problem.Quote:
Originally Posted by deniska
Using GDML and csv file with position data I generated geodata.dat file. Copied it into map directory and tried to perform the search. The result is always - nothing found.
Map was created with GDML tool also, this is the map of Moscow. CSV file is formatted according to manual.
This is because mapviewer doesn't support russian symbols?
To In7ane
Thanks for your reply. I'm tryin to make a geodata.dat from an existing map. I followed your instruction from the wikibooks site. i used statcan rnf and when i click on 3/3 save geodata.dat....
i get this error..
Non negative number required.
Parameter name: value.
Details
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: Non-negative number required.
Parameter name: value
at System.IO.FileStream.set_Position(Int64 value)
at ax.e()
at ComponentAce.Compression.Archiver.BaseArchiver.Int ernalOpenArchive()
at ComponentAce.Compression.Archiver.BaseArchiver.Ope nArchive(FileMode fileMode, FileAccess fileAccess, FileShare fileShare)
at ComponentAce.Compression.Archiver.BaseArchiver.Ope nArchive(FileMode fileMode)
at GMDL.GEOmain.SaveDAT_Click(Object sender, EventArgs e) in C:\Documents and Settings\Admin\Desktop\GMDL\GEOmain.cs:line 643
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Global Map Download Tool
Assembly Version: 1.0.0.34880
Win32 Version: 1.0.0.34880
CodeBase: file:///C:/GMDL/GMDL/bin/Debug/Global%20Map%20Download%20Tool.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
ZipForge
Assembly Version: 1.3.0.0
Win32 Version: 1.3.0.0
CodeBase: file:///C:/GMDL/GMDL/bin/Debug/ZipForge.DLL
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I don't know.. is it the microsoft .net framework version that i have that's why i'm getting this error
Codaz, 18a is just small bug fixes so far, and yes, that's Russian :)
DennyPSP, v .NET 3 vosmoshno rabotayut kartinki bolshego razmera (iz MapCruncher: "raster renderer to use new libraries in .Net 3.0, which can process raster images without loading the entire image into memory") ya posmotryu esli dlya zapisi toshe rabotayet i togda moshno budet odin fayl zapisivat. Esli karti razbiti po x, y, i zoom to moshet bit moshno podognat cherez Custom JPG/PNG - http://en.wikibooks.org/wiki/Map_Thi...ith_parameters - ili pohoshee s nebolshimi izmeneniyami (kak Rambler), skashi paru ekzemplyarov i ya posmotryu.
Ahill, I recall Russian working for geodata in Map This! (maybe the Russian version though), try a reverse lookup next to somewhere that's indexed in the geodata, and see if the text shows up correctly. If it does not - it's probably an encoding issue in GMDL - could you post a sample of the source CSV and a copy/version of map this that you are using it with; if it does - the problem is probably with the relaxed search in map this.
sleekyboy24, your .net framework is ok, that's a crash in the zip component that I'm using (on seeking within a file from the looks of it). It's most probably a permissions/some other disk issue - try running it from your desktop rather than from C:/GMDL/GMDL, sorry I can't be more help with it - but I have no real idea of how the zip component works internally.
Quote:
Originally Posted by in7ane
Последние фразы не понял сории..что скачать?
Да скажи плиз у меня в мапкранчер ну никак не получается засунуть две разных карты в один слой..что я только не делал они каждый в своем слое..
In7ane, OSM is giving an update of the newly obtained Geodata later this month. Did you make any progression working on OSM to GMDL ?
I tried and build some csv file but it's a hell of a lot work and it didn't work the first time.
Now normal lookup works, but not reverse, but i'll figure that out...
Pro eto.Quote:
Originally Posted by DennyPSP
V MapCruncher, v novom dokumente File > Add Source Map dolshno vsyo klast v odin uroven (no pokazivayet otdelno).
Codaz, not yet - it'll be a few weeks at least.
Ок с мапкранчером попробую...Quote:
Originally Posted by in7ane
А про карты вот ссылка например
http://map.ivolga.ru/saratov/?m=8&dx=8960&dy=11270
http://map.bigmir.net/kharkov/
http://www.comfort.kiev.ua/spravka/map/odessa.php
Щас почти у каждого города есть такая карта...
а привязать проблем не составит :)
просто было бы не плохо вставлять ссылку
и копировать любую карты на комп через твою прогу..я тебе уже говорил что она лучше чем Google map downloader - говорю еще раз :)
Ahill, I recall Russian working for geodata in Map This! (maybe the Russian version though), try a reverse lookup next to somewhere that's indexed in the geodata, and see if the text shows up correctly. If it does not - it's probably an encoding issue in GMDL - could you post a sample of the source CSV and a copy/version of map this that you are using it with; if it does - the problem is probably with the relaxed search in map this.
Thanks for your reply. I'll post a sample of the csv and map this a little bit later. Unfortunately, I have not very much time now. Also i found that csv I using, contains wrong position data, may be this caused the problem. So, I'll correct it and then try again.
hey guys what upp please will you make a map from los angeles or give me the link to gogle . i have problems i need the map thank`s felixthecat
my email [email protected]
@in7ane,
Could you please look in to adding mapy.cz to the gmdl map vendors list - the map tiles seem to be 256x256 and gps aligned..
DennyPSP, tolko Saratov moshno podognat ( http://ivolga.ru/cgi-bin/map.cgi?id=...&dy=11270&fs=8 ), drugie ispolzuyut strannuyu adresatsiyu ( http://rmt.a.vnetgis.com/?uamap_cuid...q=get_map&st=3 i http://rmt.vnetgis.com/?map=odesa&ua...map&l=ru&st=19 ). Postarayus eto na nedele dodelat.
deniska, it doesn't look like they are gps compatible (links below) but the addressing looks reasonable enough, let me know if you still want it as a non-gps source:
http://mapserver.mapy.cz/base/10_7ec0000_8180000
http://mt3.google.com/mt?n=404&v=w2....&y=1387&zoom=5
http://mt3.google.com/mt?n=404&v=w2....6&y=693&zoom=6
[QUOTE=in7ane;481640]DennyPSP, tolko Saratov moshno podognat ( http://ivolga.ru/cgi-bin/map.cgi?id=...&dy=11270&fs=8 ), drugie ispolzuyut strannuyu adresatsiyu ( http://rmt.a.vnetgis.com/?uamap_cuid...q=get_map&st=3 i http://rmt.vnetgis.com/?map=odesa&ua...map&l=ru&st=19 ). Postarayus eto na nedele dodelat.
zoom=5[/url]
ты сильно не заморачивайся если можно будет сделать шаблон допустим на примере Саратова..Просто похожие карты скачивать - будет хорошо..если нет то и ладно...Я уже переделываю карты из OziExplorera :)
how's it going? it's been a while since I last posted. Anyway, i'm done with school and about to leave for Thailand for an extended vacation. Finally get to test MapThis in Thailand as I've promised.
So yea, I'm making a map for a drive from Bangkok to Chiang Mai right now and noticed a problem with GMDL 0.4.18a which I think is the latest version, correct me if I'm wrong.
In the advanced options, when I checked 'ignore missing tiles', the box for 'prompt to retry' greyed out. However, when I unchecked the box for 'ignore missing tiles', 'prompt to retry doesn't change back to normal.
Also, I'm sure this has been asked before, but seeing how I've been away for a while, I was wondering if it's possible to set the zoom level for select detail level to be at a lower level, possibly at the half way between max/min zoom.
Hi and thanks for the wonderful application, i want to know if its possible to include and option in the next release that i can disable the 1x zoom level, because i download giant maps like the whole Turkey and the 2x and others will be enough for me.
Thanks for your consideration, and good luck in life.. : )
Yigit Ozan from Turkey..
It's up to you.Quote:
Originally Posted by in7ane
What about the new geodata files? Are they usable at all? I recall that there were some gaps in them...
deniska, a quick reply about the new geodata:
missing states: http://www.in7ane.com/psp/posts/error_log0.txt
missing borders: http://www.in7ane.com/psp/posts/error_log1.txt
missing counties: http://www.in7ane.com/psp/posts/error_log2.txt
Otherwise it works fine - let me know if/when you can rerun those states/counties and we'll do an update.
The current geodata is missing Oregon (maybe others too, I can't remember) but has Oklahoma and California so potentially a 1.5 release of the mix and match geodata set can be released (let me know if you think this is a good idea).
zsc, fixed the sloppy interface, thanks for reporting that. As for the zoom level selection - I am still getting around to that, so no promises on a time scale.
Note: if you are running 18a you may want to enable copying icons under Advanced - it is disabled by default now.
in7ane, maybe a weird question but are you improving the GUI of GMDL in future ?
Because it now has more than 300 clickable buttons spread all over the screen.
Should be more handy to supply a wizard mode or something.
Because i'm in Europe and i won't use the 50 buttons for Geodata for US anyway.
Also, Geodata of the Netherlands should be available from OSM from 20th of August so how is your progress so far on ripping Geodata of OSM ??
I believe that problems with offsore counties are due to TIGER errors or format change..Quote:
Originally Posted by in7ane
I tried to load data for "AS" in roadnav and got error popup about some missing files...
Unfortunately Census Bureau has removed the first edition files so I can't really cross-compare..
You may want to mix&match the data for those counties from prev release if you still have it and it does look better.
As far as Oklahoma and California go - I'll re-run my scripts and post the data.. so dont' mix the old&new data for the continental states just yet
in7ane, I have uploaded CA,ND,NJ&OK
I don't think that the tiger has the data for FM, MH,PW
Please re-run your tests and let me know if anything is still missing...
deniska, the borderless counties are the same as in the original, 2006, run so I guess they are just empty. The remaining issue is missing counties: http://www.in7ane.com/psp/posts/error2_log2.txt and one of the zips is corrupt, could you reupload: 42045.zip (from PA).
The missing counties are from AR, DC, FL, NY, and PA (the 2006 set has some missing from OK, and all of OR, SC, WY). Let me know if you can rerun AR, DC, FL, NY, and PA to fill the gaps or if you want to use the 2006 data for those counties.
will do AR, DC, FL, NY, and PA tonight... thanks
in7ane said that the these tiles did not correspond with Google Tiles. The case is a map over Norway :)Quote:
Originally Posted by MemorX
Can anyone please check this site for me?
http://kart.sesam.no/
in7ane, AR, DC, FL, NY, and PA should be in.. Let me know if anything else is missing
do POI's automatically get downloaded with geodata or do you have to load that seperately?
I am just wondering if it automaticaly comes up in gps mode or not.
deniska, the geodata checks out without any errors now, you'll need a new http://www.in7ane.com/psp/gmdl0.4.18a.zip which now points at it.
rollinolin, the POIs are separate from geodata (which is just street names and numbers).
MemorX, that does not seem to correspond to Google's tiles either, it looks like northern countries do not like the Mercator projection since it distorts quite a bit towards the poles.
GMDL 0.5 - Map This! 0.5 compatibility update.
http://www.in7ane.com/psp/gmdl0.5.00b.zip
Layout fixes (anchoring, map sources in tabs with translation.txt present)
YUM Assembler fixes (CSV changes, ; delimited CSVs - no ; in file names though, actual image counts) - now with a manual: http://www.in7ane.com/psp/manual/YUM_Assembler.pdf
Disabled the default copying of icons and sounds, and synced up the ones bundled with GMDL
Sloppy interface fixes - thanks zsc
WMS/NASA error handling fixed (failed tiles remained with the text error message)
Google Hybrid is a single option again (underneath it works the same, just an interface change)
New USGS TIGER geodata, now covering all states, you can delete C:/GMDL/usgs_tiger (usgs_tiger_v2 is now used)
hi everyone,
i have a problem to do the route from 22 Peace Plz, San Francisco, CA 94115 to Stanton Ave, Castro Valley, CA 94564, IN GMDL, it shows the directions on left hand side, but it doens't let me to do "List", i have tried gmdl0.4.18a, and gmdl0.5.00b, still give me the same problem.
in7ane, please check it - gmdl throws some exception on this route....Quote:
Originally Posted by waichai
i keep getting "google satellite tile test failed" error
I am trying to build a hybrid of tacoma washinington but cant get anywhere due to this error.
Can anyone explain what i am doing wrong, or direct me to an updated tutorial on hybrid maps.
I am running version 5 of gmdl.
thanks
waichai, Google's directions seem to dislike pedestrian streets (this also affects Nieko's web interface), I think the maps.google.com interface does a pre-step to get the lat/lon or the nearest road.
This works: San Francisco, CA 94115 to Stanton Ave, Castro Valley, CA 94564
rollinolin, Google hybrid is satellite + transparent overlay, and they seem to block IP's for a few hours if you download more than 1000 or so satellite tiles.
deniska, I think I've found a bug in the goedata search code (sorry, should have picked this up before the release but only got it after looking at UK postcode problems):
If you get some results via a search, and then do another wide search (just a street name without a number) the same results appear. If a more stringent search is done (with a house number), actual results will be returned.
My guess at what's happening:
geo-client.c
address_geolookup2()
does not reset zipcounter=0 since that line is after checking if the house number is 0 or null and returning -1
then in main.c address_geolookup2() relaxed search and wide search are skipped
the fix would be to move zipcounter=0; in address_geolookup2() to the FILE *fp; area
or have it in address_geolookup2() before address_geolookup2() is first called
in7ane,
Look's like the bug slipped in with MIB.42's relaxed search update
I'll fix it in the next update...
can ne 1 tell my step by step to get my gps on my psp to work?
Stirlo read the FAQ, this topic is NOT the place to ask that :)
Here's the link to the faq, read it please:
http://dcemu.co.uk/vbulletin/showthread.php?t=51440
Thanks.
Hey folks, I'm trying to find the best way to make POI files for large areas, such as an area that is 2 lat/long wide. The only way I have found so far is to zoom in very far and then concatenate all the files together into one file.
(I'm trying to do files for the greater San Francisco bay area + Santa Rosa + Sacramento.)
I noticed that the NYC POI files that are included in the latest MapThis! build are very close to the sort of thing I'm trying to do.
Thanks so much!