GBA emulator on PSP is a hard task, because when you write an emulator, you need between 25 and 50x time the speed of the original hardware. In a GBA, the processor is running at 16Mhz, so you need a > 400Mhz ... On your PSP, you've got 333Mhz :(Quote:
Originally Posted by gunntims0103
Well a N64 emu is being made and is doing great. Maby the GBA needs something that the N64 doesent making it hard to emulate.
Quote:
Originally Posted by zx-81
Not that I know anything about coding...but according to your suggestions of 25 to 50x processing it would put the ps1 at needing 846.5Mhz (25x) to 1693 Mhz (50x) to emulate...
and the SNES at 89.5mhz (25x) to 179mhz (50x)
While Neo Geo's Motorola only would be 300Mhz(25x) to 600Mhx (50x)
I can't believe thats the main factor as to making an emu work....Seeing as how the N64 is partially working, The SNES is mostly working..The Neo Geo works near perfect and the PS1 is supposed to be emulated (even if not full on power)...
Yeah that would bring the GBA in at around 419Mhz (25x) and 839 (50x)
I would assume it COULD be possible...at least at current SNES emu speeds? But my guess it's it's more than just processor speed we are talking about here....
Maybe at least we may someday have a GBA emu that will be playable on games that don't push the hardware fully?
Time will tell, one thing I've seen here is don't count anything out as these are some of the most brilliant "hobbiests" I have ever seen! I can only imagine what will happen if the Firmware Chip mod is real.
Someone will find a way to sneak more power from the media processor or something...we got massive brains on our side here people! thats why we need to thank them more and Sony has to keep patching holes:D
Yes you are right proccessing speed is not everything.
well the GBA has a 32-bit 16.8 mhz ARM processor (based on a RISC processor, because its easyer for a RISC processor to understand C based programming code)
as well as an 8.4 mhz processor based on the Z-80 processor used in earlyer systems.. (used only for GameBoy and Gameboy color emulation, and only 1 processor can be used at a time)
where-as the Snes uses a 16-bit processor capable of speeds of 1.79, 2.68 and 3.58 mhz (much slower)
in summation to this point, I dont beleave that the GBA will be emulated properly for some time, just on general principle that the processing demand is just to high for the system trying to run it (even my PC running at 2 ghz has some problems running a few GBA games at full speed....
as for the SMS emulation, I'd still like to know why there isnt perfect sound emulation.. I tried to play Y's and the sound is very garbled, and has some static to it.. I just wondered if there was any reason that the sound hasnt ever been perfect..
I will admit though, this emu does have the best quality sound of any other psp sms emulators, just wondered why even the snes emulator has perfect sound, and the lower quality sms doesent...
(is it because it uses a pre-programmed sound frequency audio system? for instance, the sounds are much like MIDI, the game tells the system what chanel to play, and what frequency (eccept in the case of the effects chanel))
also, the GG and SMS are the same exact system, why has the emulator been split at all? the accual SMS system will play GG games, and the GG system wll play SMS games with nothing more then a pin change and adaptation.
great job- reminds me when i used to be small and i had a game gear
can anyone explain to me how do i load it on 1.5? it has only one "emusms" folder. how can i make two?
How the heck do you install the EMUGG on 1.5 PSP with only 1 PSP folder???
i get the image and then my psp freze, can anyone help me?
Does it work on a 2.0+ firmwire or just a 1.5? ( I noticed in the read me file it was tested on a 2.5) Also, Lets say it does run on 2.6, when using SEI PSP Tool, before you push the generate button , a little window pops up and has you choose between 1.0 or 1.5 . Is there another PSP tool that knows 2.6?