Enableserialport=0
Does not work!
Printable View
Enableserialport=0
Does not work!
Can you see in the "GPS-Info" that the GPS-state is "on"?Quote:
Originally Posted by ich²
If it does: Where do you test for the connectivity (i.g. in your house, outside)
If you test it inside your house, try to go outside, and be patient, it can take a while for the PSP290 to see some satellites, and to get a fix.
GPS State: ON
I testet it in house on the streets in bus :confused:
Can´t anybody help me? MSN or ICQ,Skype?
Here is exatcly what I do.
Put on GPS Receiver (PSP-290)
Start MapThis!
Select my Map
Bush the Square Button (GPS ON)
And wait for a Satelit Signal
:/
Yeah. I got it to work. Don´t know why but it does work.
Is it possible to make a map where I can enter the City and Street name and it navigates me there?
^^^
only if you're in the U.S i think. You get something called GEO DATA.
I'm in the UK so i dont know how it works properly. I assume it's quite simple to set up.
P.S
best way to get sattelites is this:
go into your mapthis software. Choose your map, e.g myarea
when it loads up and you're shown your map on the screen, press SQAURE on your PSP. You'll go into: ''GPS ON'' mode. Make sure you're outside your house. You wont get a good signal inside your house. If you're in an open are it's better rather than a forrest etc.
Then press START, go to GPS INFO. Watch the sattelites slowly but surely find you.
When they do, go to the option above GPS INFO, and tap X. It'll read your position and show you where you are on the map.
Simple :)
I´m from Germany so there is no Geo Data :(
Will it be possible in the future?
I will try it with "http://getroute.nieko.net/"
Just open the createt file and press square right?
You can download route files (which are POI files) through http://getroute.nieko.net/, which you can open using POI lookup. You don't have to press Square, as that enables GPS mode.