You're bricked too, unfortunately. that's what happens to my second psp.Quote:
Originally Posted by acn010
Printable View
You're bricked too, unfortunately. that's what happens to my second psp.Quote:
Originally Posted by acn010
no, your wrong....... my psp didnt brick.... it still works but it just doent want to turn off
dam are you serious. out of all the people i wouldnt have thought you would brick..Quote:
Originally Posted by acn010
edit: o my bad u said ur psp doesnt want to turn OFF lol
Anyone who's bricked, try removing the battery then replacing it and accessing recovery mode.
Hey, it can't hurt.
And as for you mr-my-psp-will-not-turn-off, hold the power switch up until it turns off.
Cloudy
Didn't work for my poor 2nd psp.Quote:
Originally Posted by Cloudhunter
Now u r scaring me. I guess it is OK with ur TA-079. I got 2nd one too of TA-082. I better wait for more development then. :(Quote:
Originally Posted by zoson
:rofl: im not a noob!!! roflmao!!!!Quote:
Originally Posted by xg917
ok, but really my psp works yet it does want to turn off
don't lie to me :mad:Quote:
Originally Posted by acn010
weee, iono if i should update or not
COMPARED TO YOU.... HELL NO:rofl:Quote:
Originally Posted by Gold Line
Finnaly updated the firmware on both psp's, 3.52 M33-3's vsh menu is awesome, nice release.
What a good comeback you deserve a round of applause for thatQuote:
Originally Posted by acn010
ok about the wont turn off thing just take out the battery go into recovery and disable start it back up and then the next time you enable it it should be able to turn off (worked for me)
disable what....Quote:
Originally Posted by Safari Al
the vshmmenu in configuration
Mine also had trouble shutting off properly from the XMB the first time. I had played around a bit with the CPU speed settings through the vshmenu. It works just fine now, though.
hm... ill try that... somebdy must contact them about such flaw (or glitch) meh... thanks anyways
Blackrave thanks alot I went back to 1.5 then went to 3.52 M33, then to 3.52-2. Now I just updated to 3.52-3 and it updated fine this time and I had no problems, but I still can't get 333mhz in the XMB. Guys I swear I was getting 333mhz in 3.52-2 before I updated but then when I went to "-3" it just won't let me get 333? I'm using the PRXInfo v0.1 by Ac_K to see what my XMB speed is and it has NEVER failed on me before. But on this new update it just won't let me get 333 in the XMB. It's important to me because I like having that 333 to load all my emulator icons faster and everything, all my other stuff works fine is anyone else having this issue? Trust me I have set and reset the XMB speed in recovery but still no 333, anyone else? M33 if this is some wierd code in this update that prevents it please update it again because I need my 333.
by god if you dont get 333 mhz in the xmb, how could it run.
the xmb is the lobby of the psp.
it really doesnt have much going on. in fact it runs just peachy at 100 mhz
Hey folks, I introduce myself blah blah blah on to my query.
While I have used M33 upgrades for a while now, I'm still a rediculously hopeless newb when it comes to the seplugins. I know nothing about what these do (If there is a connection to popstation, I'm claiming absolute ignorance in this case), or how to use them in an update.
Hell, I'm sure I'm in the wrong forum topic for help like this, so if anybody can get me started in the right direction, I'd greatly appreciate it.
Keep doing that voodoo that you folks do so well.
-TF
Who actually edited the EBOOT at ps3news? Was it Team M33, or was it ps3news? That's confusing me.
At any rate, you spend time building trust in your product with a community (whether it's free or not). One stupid, childish thing like this damages or even destroys that trust. If this was done intentionally (and I guess that's still to be determined), whoever did it is actually, deliberately costing people money. It's one thing to do it accidentally; deliberate intentions to destroy your hardware drops the perpetrators to the bottom of the food chain in my book.
As for the "license" on M33-3, I suppose Team M33 can do what they like, but imposing your personal morality on your users is just immature. What they may be attempting to achieve in this case in the name of "antipiracy" is, to me, equivalent to requiring me to be of a certain religion, or to love and embrace seatbelt laws, just to use their cfw.
Something that's possible, I suppose, is that ps3news deliberately altered the M33-3 release to cause this kind of chaos, to intentionally discredit Team M33 (anybody remember the cyanide-laced aspirin on store shelves in the 1980's?). I don't know what the relationship is between the two, but it doesn't sound amiable.
PS3News hex edited the anti ps3news message in the firmware installer, but the installer bricks if hex edited.
So it's PS3News fault.
Cloudy
OMG
How on gods green earth could anyone on M33 team know how to associate your PSP with you or where you have been on the internet?
Thats just stupid.
The only way the updater could find something wrong is if the file was edited or if you were trying to install it on top of an edited installation.
Solutions:
1) Dont edit the update... duh...
2) Dont use it to upgrade an edited install.
Go back to 1.5 and then upgrade...
the only sure way to delete any stolen source code out of flash... ungh...
Stop beating on each other and go play some games.
sorry but its not ps3news's fault if a person used to visit there site and no longer does yet still gets bricked.Quote:
Originally Posted by Cloudhunter
So is this thing safe to flash on the PSP yet? i have M33-2 and im not sure to update to update#3 if it messes up PSP once updated.
Yeah, but if PS3News hex edited the EBOOT which is why it bricked, is it M33's fault even then? :)Quote:
Originally Posted by Anger
And is it M33's fault that PS3News have edited every comment on their release thread saying that it installed fine, even when they knew it was a bricker?
Cloudy
Sum1 at maxconsole says he went to ps3**** site with his PSP & nothing happened.
That's because nothing happens.Quote:
Originally Posted by Nocuddle
Cloudy
definetly not if you like visiting any site there is. basically at this time if you have visited ps3news.com then it will brick your psp.Quote:
Originally Posted by darknight88
cloudy dont get me wrong im not standing up for the scum at ps3news.com - they are the lowest of the low but bricking psp's because people happen to visit the site (even by accident) is just wrong - even you have to admit that. we all know exactly what ps3news (and before ps2nfo.com) has done and its pathetic and sad attempts to gain money, but why couldnt m33 target the site itself rather than the people that may/have/will use the site? there after donations and yet there bricking the psp's of the very people that they want to donate to them. this is just madness.Quote:
Originally Posted by Cloudhunter
in case you didnt know it also bricks peoples machines who have visited the site no matter how long for and the sad thing is there will be people who have been linked there and not realised that its still in the cache. the number of inexperienced psp users that will brick as a result of this alone will be large.
*EDIT* can it be confirmed that it does not brick if you just visit the site?
UPDATE:Quote:
Originally Posted by MicroNut
I was using New UMD Dumper and getting major playback problems.
I tried using USB-SSS and now everything seems to ok.
I changed the ISO mode between M33 and ISO9660... didnt seem to make any difference.
Tested the movies listed above.
Sony 4gb stick performed as well as the 2gb counterfeit card.
Dont use New UMD Dumper
USB-SSS seems like a good choice.
I actually have no idea what ps3news has done for money.
will someone please enlighten me to how one website has become so hated so fast.
idk mabye old problems with team m33?
Arnt they the ones who hacked maxconsole forums,Quote:
Originally Posted by scarph
stole WildCard source code and then
released it to anyone willing to post it as their own,
using ps3news as the distribution source?
Register & post there. Say sumthin bad. the admin will edit u right away even block u from posting.
I had this & curiously, I cant even PM the admin. LOL
Attention: The reason why YOU can not start a new thread/reply to existing threads is because either you are a new user who hasn't replied to threads first before starting your own OR your account has received an Infraction which revokes your privilege to post here. The latter means you didn't follow our clearly defined Site Rules (most likely Rule #1, mentioning/linking another Web site on ours).
Currently this Infraction's duration is permanent... meaning you will NEVER be able to post again here. You can still download files and view the Forums, but your account is now subjected to additional advertisements, pop-ups, pop-unders, etc. You may also apologize for your careless actions and beg to have your Infraction reversed in our Infraction Purgatory section if you wish. Next time, read our Site Rules prior to posting and have a nice day!
I try to beg! I cant even beg! LMAO
they were looking through wildcard's PMs, and eventually led them to find 3.40* LE, and the LE source code...and the "lamers" released 3.40* LE, and were going to release the source code, but team wildcard got cornered and released the source themselves..
The "lamers" are not good people, and if youve been to their website chances are your consorting with them, so to keep them down Team M33 have taken the initiative to stop these cock suckers!!
I say farewell to the lamers, and i look forward to team wildcard being able to concentrate on what matters most ( the custom firmware) and not the stupid f*ckin lamers!!
Sorry but I like having the choice of running the XMB at 333mhz because I like having the internet working at 333mhz and I have a bunch of emulators and applications with custom icons, backgrounds, and background music. And it takes like 5sec to load the music and all for certain apps since they are big (on 222mhz) but when it's 333mhz it's more like 1-2 sec and that difference does matter to me. So basically I think if the M33 team gives you the choice to have 333mhz in the XMB then it should work, is anyone else having this problem because if so this bug should be reported to the M33 team.
yes, the problem has been noticed, and wifi has always had problems at 333 :(
Oh well I haven't had ANY problems with my WiFi at 333 just can't get the XMB to get past 222 in "M33-3".
I agree 333Mhz in the XMB could be useful.Quote:
Originally Posted by CaptainMorgan4
I too also have tons of themes, music, apps and emulators.
However I have not seen any slow down accessing these files or games.
What EMU's and or APPS are giving you problems?
No I can't get 333mhz period.