MAP THIS! version 0.461S (beta) with support for PSP-290 GPS accessory

but why 0.48 doent't work for me???

i've taken the two prx from 3.03 / 3.10 / 3.11 FW but still doesnt't work...

p.s. i have 3.03 oe-b

@GiUd@
what Directory have you set to use homebrew in recovery mode?
if you set it to 1.5 the use the folder ms0:/PSP/GAME
if you set it to 3.03 then use ms0:/PSP/GAME303

and maybe the prx need enabling in recoverymode but I'm not really sure about this.

Quote:

---

Originally Posted by rhygin

@Russoxley187
The 0.48 release is only for GPS290 so will not work with your serial GPS.
To get it working with 0.47 do the following:
First install the latest 0.46 for serial GPS(you can find the link for this in my FAQ in deniskas discussion forum). Then you have to be sure you use the correct EBOOT.PBP. In the package for 0.47 there are two EBOOT.PBPs, one for GPSSlim and one for PSP290.
You need the one for GPSSlim its size is 701KB in windows explorer (the size of the GPSSlim EBOOT.PBP is 796KB). Put this EBOOT.PBP in the mapviewer folder and leave the original EBOOT.PBP in the mapviewer% folder.
This way it works for me with holux gpsslim236 and 3.03oe-c firmware

---

Thanx,

I will have to try that when I get home..
I'll let you know.

Quote:

---

Originally Posted by rhygin

@GiUd@
what Directory have you set to use homebrew in recovery mode?
if you set it to 1.5 the use the folder ms0:/PSP/GAME
if you set it to 3.03 then use ms0:/PSP/GAME303

and maybe the prx need enabling in recoverymode but I'm not really sure about this.

---

In the recivery mode i set to use 1.50 kernel in fact i put my homebrew in PSP/GAME

but i don't think the prx need be enabled with vsh, because you must put these prx not in seplugin, but in the folder of Mapthis 0.48...

all right?

it´s amazing! and it works great in my car, too.

is it possible to make maps in hybrid mode?
i think they would look much better.

thanks for this awesome software. this is the best app. ever done 4 psp :thumbup:

now i´m goona look out for a beach-cover or something like that, so i can use my psp while it´s raining^^

happy ace

i've done 4 things :

1 - put 2.71 usbgps.prx and 2.71 usbacc.prx in flash0:/kd -----Crash while loading

2 - put 2.71 usbgps.prx and 3.03 usbacc.prx in flash0:/kd -----Crash while loading

3 - put 3.03 usbgps.prx and 2.71 usbacc.prx in flash0:/kd -----Crash while loading

4 - put 3.03 usbgps.prx and 3.03 usbacc.prx in flash0:/kd -----Crash while loading

i don't know now what i can i do... :(

GiUd@
put them in "psp/game/mapviewer"

done...still doesn't work...
damn...

GiUd@, how did you get the prx files?

The best way is to use PSAR Dumper and hit O (circle) when prompted.

Depending on your firmware, create a new folder.

Firmware 3.03OE (any variation)
- Create GAME303 in your PSP directory, this is where you'll put mapViewer folder

Firmware 3.10OE (any variation)
- Create GAME310 in your PSP directory, this is where you'll put mapViewer folder

From my experience, as long as you put the mapViewer folder in GAME303 (or GAME310) it doesnt matter what you set in Recovery Mode, which applies to the "GAME" folder.

Next, try with 2.71 prx files, put them in the mapViewer folder.

Also, did you replace the prx's in the flash0:\ with the original files? I hope you'd backup those files before messing them up.

i've put Mapviewer in GAME303 but it doesn't start...

i set my kernel to 1.50 and it doesn't work in GAME303

but also with kernel 3.03 it doesn't work...

tomorrow my gps is arriving, and i can't use mapthis.... :( :(