after opening my PSP, my thumbstick continues to move down when it is centered. please help!
after opening my PSP, my thumbstick continues to move down when it is centered. please help!
I Need The Help But I Am At My School So I Can Not Get Back To This Website Right Away, So I Sent You My E-Mail Address VIA A Private Message. Please Help!!!!
Thank You!!!!
Elpepo17
I Need The Help But I Am At My School So I Can Not Get Back To This Website Right Away, So I Sent You My E-Mail Address VIA A Private Message. Please Help!!!!
Thank You!!!!
Elpepo17
Ughh, Sorry Had To Post Twice
I've just replaced the analogue stick with a brand new one. Ike replaced one before all i did was unscrew the psp unscrew the old analogue stick and put another in the same place were i took the old one out off. so i thought it would be as simple as that this time..
This time i just replaced a new one and did like last time just screwed in the new one and put it all back together. Didnt work this time still keeps doing the same thing if its a game were its a language selector it will just automatically starts scrolling through them very fast! so i thought maybe it was a faulty anologue stick. so i got a new one. I havent put this one in yet to test it, but what i did notice was in the packet the anologue stick came in there was a very small rectangle thing! now maybe thats the piece im supposed to put in with it, the problem is i have no idea were im supposed to put this little rubber thing as ive never noticed one before, if someone could maybe help me a little id be forever greatly in your debt. even a pictured guide were someone could point me to, explain were it goes. Not sure if its if any use but i have a psp phat and its the psp phat 3d anologue stick i bought to fit in it i just dont know were this rubber thing goes or why its not working.
Thanks ever so much for taking your time out to read all this, im very greatful indeed and hopefully one of you experts out there could shed some light or point me to a nice simple guide.
Thanks Again
2fast2C
Please excuse my spelling!!!
I also apologise if im piggy backing on someone elses post1
Hey all im having a problem with my analog stick it moves down and I lost the clear part that sits on the gold contacts next to the daughter board where the lcd is place any ideas?
I joined this forum to seek help on this topic... ok, im following the comments up to page 10 and tried opening my analog knob... voila... the spring did not went inside well... it broke, it put back the ends together... when i finally put it back in the assembly, it DOES NOT return to the middle anymore... so it's messed up, i agree, and i probably need to replace it ASAP...
BUT, the fact that it still moves in different direction is still ok for me...
my only problem is that, it MOVE SLOOOOOOWWWWLY.... I'm currently playing Valhalla Knights 1 or 2.... it moves via analog stick, no other option! and normally the main char runs... no option to walk... however, due to the prob with my analog stick, it also WALKS SLOOOOOOWWWWLY.... is there anything else i can change or set or clean or dismantle.... same goes with the Internet Browser, it MOVES SLOOOOOOWWWWLY....
HELP PLEASE!
this thread may be old but im going on luck here lol...
I hav recently repaired my analog stick dilemma with your help, for which i am incredibly thankful, now i have a new scenario. Analog work fine but occasionally if i move to the right, it keeps moving in said direction until i jerk the analog to the left, any idea why?
This is particularly annoying while playing Warriors Orochi 2 >.<
Ok, So here's what happened.
For some reason the analog pointer keeps going to the North West direction even if I don't have the analog stick and faceplate.
Also is there a way to get another rubber because I lost mine.
Thanks.
I know that this is an old post but if you could help I would be grateful.
My analog stick is always going up-left, I taked of the little rubber it didnt work, I tried to replace the analog stick it still doenst work, then I took of the analog stick and the problem reamins!!!!!! O_O
Do ya think I've to replace my psp board? please help me I can only play half of my games thanks to this problem -_-
mi psp is doin all the above =( help me please
Hey my son has the older PSP unit and is experiencing analog stick trouble so I replaced the analog stick and installed it only to find out that the same problem exists. The problem is that the pointer wanders and as I try to control it doesn't respond. The pointer either goes down or goes up. I tried to tighten or losen the screws on the stick and face plate but it didnt work. I cleaned off the rubber pad between the contacts but that didnt work either. It's clear that the rubber contacts arent working. Is there a way to replace the rubber contact with a new one?
U saved me 200$ :D thanks!
(btw the fix was the pressure)
:thumbup::thumbup::thumbup::thumbup::thumbup:
I need your help my psp analog stick is not working 100% it works half direction it does not work all the direction when l move it to the left side it works well on the right side instead. What could it be? Can you send me your tips and help on how to fix my analog stick from my psp game console unit. I will wait for your reply soon.
junio77
my analog stick is like jammed downwards. Even when I try moving it up, I still move downwards. How do I fix it?
You will have to buy a new analogue piece, the chances are that a piece of plastic is broken inside... If not, it will be dirt which you can remove with a slim paper clip.
hi, my psp analog stick is malfunctioning because of overuse in some games like monster hunter and DJmax, when i play super collapse 3 the cursor just keeps going down then when u move the analog stick up, it then stucks up at that direction...can someone pls help?
hey dude , .so glad ur here . ,
i really need your help
my analog stick suddenly , .stucked , .
plss help me , .tnx ,,
Firstly, your English is horrible.
Secondly, please be more specific with your problem so someone can help and direct you to the right location.
As I suggest to everyone else, Google, possibly even eBay. Because you can buy the part cheaply enough, though you would probably find the problem is just lodged dirt (a common problem).
uhh.. i was trying to fix my spring which popped out and i did. so i put it back into my psp only to forget that i forgot to do something. so i took out my analog stick and when i popped it out, the spring popped out again. BUT this time the spring isnt a circle, its just a line. its not attatched to the other side. any help?
i need help psp is slim and its moving on its own in different direction and when i force it to move to a direction it stops moving
how can i clean it up and what if it still didnt work does it mean its broken and have to be replaced with a new one
I have a rather interesting problem. My analog stick works fine untill I press down on my d-pad. When I do that, I can't move the analog up very well. It moves really slowly to all up-directions. Going to sleep mode and coming back fixes it untill I press down again.
hey i just bought a psp3000 modded from my friend today he said it was nearly brand new and used it for only 10 hours tops. but anyways once i tried out to anolog stick it was all good but for some reason when i want it to go straight down, it wont budge at all. HELP PLEASE!
hey :D plsease help me to
I have a problem with my x,square and the others to ... not with the arrows ... they suddenly stopped working
I disassembled it today, tryed to clean something but it didn't worked :(
I have a problem with my PSP.
I thought it was the joypad so I bought a new one but it did the same thing even with the new one.
I now removed the joypad and still does it,have a look at my video here http://www.youtube.com/watch?v=eE0QHLFl1YU
It seems the cursor is moving up or down on his own madly if I go into the web browser the arrow it is steady up in he left corner,please help my son......
Thanks a lot.
anyoneeee?
My psp moves slow left and up need help
http://www.youtube.com/watch?v=RMjqiZe22rg
video link http://www.youtube.com/watch?v=4uOcVHNJHP8&feature=related
help
Well, I've got an PSP 1K which its analog was wandering, so I soldered it directly to the Motherboard and it worked fine for some time, but I needed to take the faceplate out and forgot about the wires soldered on the board (blame me...) the first and second points, from up to down, came out and I can't solder them. Are there any others points or trails that I can solder the analog stick again?
Hey umm My psp analog stick Moves by its self when i play The Sims 2 What do I do Without opening the psp