http://img160.imageshack.us/img160/5...apspmod7uo.jpg
LLAMMA has finished an interesting LED mod for the psp consisting of placing LEDs in each trigger button and the center of the D-pad and face buttons. The LED’s are powered by the PSP’s battery and they turn off automatically when your PSP gets low on power.
This is an awesome hardware mod for the PSP. But your gonna need some decent soldering skills To solder The LEDs onto the circut board.
Tools Needed
*000 Phillips Screw Driver
*Low wattage (15-20) Quality Solder Iron or variable temperature Solder Station
*X-Acto or other blade for stripping/scratching off the insulation on the wire
*Small Tweezers
*5/64 Drill bit and drill
Supplies Needed
*30AWG Magnet Wire (enamel coated) (NOT 30AWG Kynar)
*0603 SMD LED’s
*10 Ohm Resistor for 4 blue
Complete Tutorial can be found Here Enjoy!
Post feedback Via Comments below
