Printable View
i wht to install this for the recovery mode i ready have the hen c and reverse dev hook on me 2.71 and i have the auto installer but what option do i use??????
or should i format my memory stick and install evryting if soo wht option is that???lol plz help
Plz some one help me
HarleyG's is for 1.50.
If you want Recovery console on 2.71 you must get Dark_Alex's 2.71 Special Edition rev A. (Recovery is coded by HarlyG, BTW)
ohh ok
lol i have the instaler now wht option do i use
1. Install the SE-A and DevHook for 2.71
2. Install SE-A and DevHook for 2.71 with 1.50 firmware
3. Just the SE-A
4. Just DevHook for 2.71
lol
You must be on 1.50 first.
those are the options for the 2.71 special firmware i have the reverse firmware already installed but i want to install the special firmware for 2.71 now wht option do i chose for my situation???
1. Install the SE-A and Dev Hook for 2.71
2. Install SE-A and Dev Hook for 2.71 with 1.50 firmware
3. Just the SE-A
4. Just Dev Hook for 2.71
its that simple this is for the 2.71 special firmware revision A
if you have 2.71 and HEN-C you cannot put in any custom firmware. if you have a NON TA-082 BOARD you can downgrade to 1.50 and install 2.71 SE-A which comes w/ a recovery mode.
How do i know if i have a TA-082 BOARD???
grab a flashlight....pop open your umd drive like your going to insert in a game....shine the flashlight inside the psp, at the TOP RIGHT on a green section of the board, if you see IC1003 upside down...its a ta-082. otherwise, no.Quote:
Originally Posted by Vendeta
http://0okm0000.googlepages.com/TA-082-3b-1.jpg
there is a pic of where it is, although most of that will be covered by the UMD drive door...still, its in the upper right corner and is visible easily with a flashlight....if you see just green, you're good. otherwise, IC1003 upsidedown, nopers! you are beat :(
i see green ther but if i look to the left ther is a number barly visible???
ic6001