Printable View
Hello,
The title says it all really.I just got my cable from pc-mobile today and hooked my gps up to my psp.It won't work.It acts as if there's no gps connected at all.Is there something simple that I'm missing?
I have a PSP-1003(from Europe btw) and I have firmware versoin 3.52 M33-4.It works without the cable but it is slow at locking on.Any help would be very much appreciated.
Thank you in advance.
Have you connected the left power pin of the GPS module to the contact on top of the psp?, If not then thats the reason it won't work:)
Thank you for your quick response.I'm using the cable so the gps won't be directly touching the psp.Unless you mean the power pin of the cable.In which case it's in as far as it will go.
could you post a picture of the set-up, if it's not recognising the 290 being connected at all then it's probably a loose connection, or less likely, incorrect PRX files.
also I'm assuming it's this cable?
http://deniska.dcemu.co.uk/images/usb_cable.jpg
Yes it's that cable.sorry about the quality but my digital camera is on strike.they're 1.3MP
http://www.uploadimages.com/myalbum/26685
Does the power pin on the male end of the cable stop the mini usb connector from being pushed into the socket all the way, it seems from the pictures that it may be the problem. other than that it would have to be a problem with the cable seeing as the 290 works when directly connected to the unit
Thanks again Nylon but the cables seems to be what's at fault.The male end goes in as far as any other mini usb end goes in.I have sent an email to pc-mobile and maybe they can help me.
That seems bad guy, i have the same and it works fantastico.
Havent had any problem with my cable i ordered too, it works great with my GPS and my Camera :)Quote:
Originally Posted by Codaz
Could it be that youre a TA-082 Mobo user and you havent cleaned your registrykeys on your PSP after running Custom Gameboots etc, check the last flashguide and download the second keycleaner i link to in it and see if that helps ;)
Link ---> Press me