Ok so i have this sweet little peice of work going on my computer now, on problem, my minimize and maximize and exit buttons have disapeared, can some one please help or direct me to help.
Printable View
Ok so i have this sweet little peice of work going on my computer now, on problem, my minimize and maximize and exit buttons have disapeared, can some one please help or direct me to help.
Help Section!
I find that more people frequent the off topic forum rather then the help section, but if a mod deems it neccesary, then they can move it o the help section.
Isn't there a compiz control panel somewhere?
Check in /usr/bin for any apps named compiz-...
I'm sure you'll find it there.
I've never been able to use compiz or beryl because my pc is shit. :(
if i type ccsm in the terminal, i get the control panel, but i cant find anything about hiding the frames. I just hope i can find some one who had the same problem, but fixed it.
Ok sorry I meant to post this when you first posted this, I'm pretty sure this will fix it.... go to the Terminal and type this:
Always good to have a backup in case something goes wrongQuote:
sudo cp /etc/X11/xorg.conf /etc/X11/backup_xorg.conf
sudo gedit /etc/X11/xorg.conf
After that look for a section that says [Screen]... Actually I will copy my entire xorg here and bold what should be added
(This is assuming you have a Nvidia card, but it might work for others too... I can't remember)Quote:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Apr 5 02:10:21 PDT 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "HP vs15"
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation G71 [GeForce 7300 GS]"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G71 [GeForce 7300 GS]"
Monitor "HP vs15"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
Option "AddARGBGLXVisuals" "True"
DefaultDepth 24
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
After that try to reload compiz, restart, or something similar, I actaully use the Emerald themer with compiz fusion to make it look the best, but thats optional lol, hope that helped... If not search around The Ubuntu Forums always search before making a new thread though because chances are someone else has already had the problem
And for the themes and such I think you were looking for earlier try www.gnome-look.org
Why are you using compiz as opposed to beryl?
I was using Beryl, but Beryl and Compiz are joining together again under the name Compiz Fusion, which is what Im usingQuote:
Originally Posted by NoQuarter
Ok so when i ope up the xorg thing this is what i have :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ca"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
Option "AddARGBGLXVisuals" "True"
DefaultDepth 24
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
I added that little snippet, but nothing happened, maybe im missing somthing here, but i am running with a intel graphics card, so i dont know, and what about the little like docking windows, like in that video that you posted, what are those called ?
also when i put in that : su do cp /etc/X11/xorg.conf /etc/X11/backup_xorg.conf it just asks for my password, then i put it in, and nothing happens, and whats this emerald thing, i couldnt find it in my system>preferences. Im also a noobish linux user, i just got fed up with windows again.
cool,yeah I heard about compiz and beryl joining.I didn't know there had been any releases.If your using the latest Subversion I would think things are buggy and easily broken.Also some things aren't that great on intel integrated from my experience.Go get a cheap nvidia 256, it's definetly worth it.That's what I'm running on and virtually no bugs...
I was having major probs with a supposedly supported ATI 9800, I follewed every tutorial to a T including editing my xorg.conf nothing worked.I get my nvidia plugged it in and after a few apt-gets I was rockin.
Well its kinda inside my laptop, and im not really one for screwing around in my 1000$ laptop, if it was like somthing i didnt buy my self, i would, but other wise, unless by some strange circumstance, i come into money, then i could pay some one to do it.
well what about those little docking things at the bottem of the screen, they look like the apple ones, i have no idea what to call them anymore. I kinda want one of those.
There's one for linux, I saw it in the google coding place once. Search around there.
this happens to me sometimes when i use beryl.
Quote:
Originally Posted by AvengedSevenfold Fan
Do you know how to fix it ?