Printable View
I upgraded to 3.51 M33 VFW, now mapthis wont work. It crashed at loading usb module..... Is there anyone else with the same problem? I tried to replace usbacc.prx and usbgps.prx, that did not work. It used to work on 3.40 OE. If there is a solution, please share.
3.51 M33 Custom Firmware is too new. I recommend you downgrade back down to a lower firmware until someone figures it out. Or if you can figure it out, let us know.
Edit: Just upgraded from 3.03 oe-c to 3.51 M33-6 and all is running great! Used same configurations as what was in the 3.03 FW and am using Psp-290. Kernel is set to 3.51 and MapViewer is in the GAME351 folder. Not sure what .prx version I am using, though.
Works perfectly fine for me. I have my GAME folder kernel set to v1.50 and I am using the latest version of MapThis!. I even test it with my Holux GPSlim 240 and it locked on and everything. I am on 3.51 M33
With what prx files Califrag ?
oh i am not using the sony GPS sorry
i'm using Sony GPS-290 and fortunately mine works with 351 M33...
not sure which set of prx i used but guess wat u shld do now is juz try n error n chg the combis all over again...
in the first place how i got my mapThis to work is by following the instructions really carefully from the tutorial video which was posted by deniska himself not too long ago...
hope u can get ur mapThis to work again soon...all the best bro...
lazie here are a couple things to check:
boot your PSP into recovery mode by fully turning it off, then turn it back on while holding the "R" button.
Go to configuration and check the line that says "Game folder homebrew currently:" and see whether it says 1.50 kernel or 3.51 kernel.
if it says 1.50 kernel then put your MapThis program into the GAME folder.
If it says 3.51 kernel then put your MapThis program into the GAME150 folder.
This should work.
If that doesn't work then try this:
if it says 1.50 kernel then put your MapThis program into the GAME351 folder.
If it says 3.51 kernel then put your MapThis program into the GAME folder.
if none of that works.. then I don't know what else to say.
Originally, after I flashed my unit, I could not get into the "Configuration" submenu in the Recovery menu. That's when I couldn't get mapThis to work.
After the latest update, it fixed both of these problems for me. You might want to give it a try...
It could be custom XMB if your using it. I you have a custom systemplugin_bg/fg.rco it crashes the usb connection. So I'd replace that. Also, restore default settings as that seems to help.
While I'm at it. Can anyone point me to the right direcion on getting stuff setup for the Mapthis? Like prx's, files, you know. Also, where did you guys buy your holux stuff? trouble finding it for cheap.
I have CFW 3.51 M33-6 and a GPS-290.
Kernel set to 3.51.
MapThis! 0.4.97 placed in GAME351.
3.51 PRXs taken by myself from flash0 in Recovery Mode.
Works perfectly.
If it's not too hard - could you please provide a tutorial on how to get prx files. _ I think alot of people are getting confused...Quote:
Originally Posted by punkauto
I don't know seems harder than normal to me can anyone help? please?
my emailaddress is [email protected] if anyone can help IM ID tt027 Thanks.
I have CFW 3.52 M33-2 and a Holux GPSlim 236, whit MapThis! 0.4.99 it works perfectly. (It doesn’t work whit CFW 3.52 M33)
How to get the PRXs from flash0 in Recovery Mode.
1. Connect PSP to PC whit USB.
2. Boot your PSP into recovery mode by fully turning it off, and then turn it back on while holding the "R" button.
3. Select "Advanced" in "Main menu".
4. Select "Toggle USB (flash0)".
5. Now you can see the files in flash0 on your PC. Find the PRXs and copy them to the PC. Don't do anything else whit flash0, I belief it can brick your PSP.
Ok, got it to work again. I think the problem was extracting the new prx files, the size was different then that of flash0. Anyhow sorry for not updating earlier, kept saying the forum is down whenever i tried. BTW i'm on 352 M33-2 firmware now.
fyi, I have cfw 3.52 m33 and 3.52 m33-2 and both works with the psp-290.
Im running a PSP with FW 3.52 M33-2 and a (PSP-290) GPS and i cant get anything to work ;)Quote:
Originally Posted by punkauto
Ive searched the site for the latest MapThis program and all but no luck.
Could anyone give me some pointers to where i can dl files and how to ;)
Ps, i have a second PSP running Custom 3.03 OE-C and i would like it to work with that one to :)
Ds.
Can this be used on 3.52 M33 without GPS?
I just want to view the maps
0.4.99 :
http://www.dcemu.co.uk/vbulletin/showthread.php?t=62113
jomacho : Yes
ok there is a new psp GPS video tutorial for 3.52 m33 users
http://youtube.com/watch?v=EmNCzlYW8cg