Team M33 Release Custom Firmware Supporting PSP Firmware 3.52 (Update 2)

Team M33 have released anew version of their excellent Custom Firmware for the PSP which now supports PSP Firmware 3.52.

Heres Whats New:
[LIST][*] 3.52 Supported[*]M33 NO-UMD: fixed problem with several games including Simple 2500 Series Portable, The IQ Cube[*]Bug Fix for Go!Cam, GPS and sceKernelLoadExecVSH* not working in game mode.

They also updated it with a new bugfix release, heres the changelog

Changes:

- Document.dat of psx games were broken due to some important changes in popsman.prx and now is fixed.
Plus, now document.dat does not need the same gameid as game which is played.

- The compatibility issue with irshell loading psx games in usbhost/nethost has been solved.

- Changes in recovery:

1. Removed the advanced config option "use isofs on UMD inserted", as it is not useful now.
2. Added "Format flash1 and restore settings" in Advanced.
3. Added speeds 20 and 100.
4. When in usb mode inside recovery, it is impossible to turn PSP off.

- The chineses and korean languages did not work in XMB, because they crashed homebrew and recovery.
The issue has been fixed, but korean font is not there, so you need to take it with psardumper from official updater, and put it in flash0:/font/kr0.pgf.

- M33 driver: fixed SBK07, now it work.

With this release we also a plugin to load pops from 3.40, 3.51, and 3.52.
The plugin works in 3.51 M33 and 3.52 M33. In 3.51 M33 you won't see option "3.51", and in 3.52 M33
you won't see option "3.52" (use original from flash for same firmware).

Instructions: copy seplugins to the root of the memory stick. Extract the following prx of a firmware: /kd/popsman.prx, /kd/pops.prx, /vsh/modules/libpspvmc.prx and /vsh/modules/pafmini.prx and copy them to /seplugins/popsloader/ with names like popsman3XX, pops3XX.prx, libpspvmc3XX.prx, pafmini3XX.prx, where XX is 40, 51, or 52.

Activate the plugin in recovery and done! First time you run a game, it will let you choose pops version.
Next time will remember configuration for each game; press R to change it.

The plugin doesn't apply to psn games.


Team M33

Download and Give Feedback Via Comments


Donate to Team M33.

3.52 m33-2 is already out.
http://dl.qj.net/Firmwares/pg/12/fid/14194/catid/163

I was gonna post about this in the psp news when DCEmu was down for a long time. Though thanks for the news post though =/ Good work Team M33 and keep the custom firmware coming along. =D

news on both releases posted now

This is so great....Thanks again to M33...Only Exophase gba emulator goes slower...and the sound stutters:confused: ..Does annybody have this problem?...But everything else works fine...i think.

how do you use pops plugin? i got it to show up in recovery mode, but i cant figoreout anything else, now before you yell at me about reading the read me, i would if i could but its in .en and .ru, i dont thing i have anything that will load that

Quote:

---

Originally Posted by superfly

how do you use pops plugin? i got it to show up in recovery mode, but i cant figoreout anything else, now before you yell at me about reading the read me, i would if i could but its in .en and .ru, i dont thing i have anything that will load that

---

Open the readme.en in notepad, wordpad or any other text editor. It´s a single text file:cool:

i have 3.51 M33
is there a way to update update?

Quote:

---

Originally Posted by PSPFR3AK

i have 3.51 M33
is there a way to update update?

---

first you have to update to 3.52 m33, then update to this

the locationfree doesn't work :(

can i adding the PRX of locationfree on flash02???

location free didnt work on any OE firmwares.. it was deleted to save flash space for the firmware.

Exophase gba emulator goes slower...and the sound stutters ..Does annybody have this problem?

Any people who are new to Installing custom firmware I have found a good guide for you on how to install! So read through this before you upgrade to Team M33 3.52 CFW

Link

Nice work Team M33.

every time better :D

Quote:

---

Originally Posted by fucht017

This is so great....Thanks again to M33...Only Exophase gba emulator goes slower...and the sound stutters:confused: ..Does annybody have this problem?...But everything else works fine...i think.

---

I have no problems with gpSP after this update. I would double check your gpSP settings to make sure they are ok.

I reinstalled gpSP,and edited the settings,and it works fine again...Thanks Lodis

can sum1 help me get super smash gp on my psp firmware 3.52

No, because it's not possible. Wait for a downgrader or homebrew-enabler.

M33 are doing great job

Quote:

---

Originally Posted by MassaM

I could not update, when I press X on the 3:33:33 icon my psp shutdown !!!

please help ...

I put the file "M33Update" in the GAME150
and the file "seplugins" on the memorystick directly.

then, when I ran the update my psp shutdown and dose not start again unless I go to the recovery mode then I reboot so, psp work normally but without the update ...

---

your in the CFW 3.52m33? you can only do this update if you have this firmware and when you make the update in this tread your CFW will change to 3.52m33-2

Hi all,

I want to upgrade to 3.52 M33-2. Will i put all the files attach here in folder m0:\\PSP\GAME150?? Pls help me out. Im on 3.03 OE-C and really wanting to upgrade to 3.52 M33-2,

Thanks in advance..

i have 3.52 m33
i want 3.52 m33#2
i cant understand the instructions in the read me
yes i can read it

Instructions: copy seplugins to the root of the memory stick. Extract the following prx of a firmware: /kd/popsman.prx, /kd/pops.prx, /vsh/modules/libpspvmc.prx and /vsh/modules/pafmini.prx and copy them to /seplugins/popsloader/ with names like popsman3XX, pops3XX.prx, libpspvmc3XX.prx, pafmini3XX.prx, where XX is 40, 51, or 52.

the bold part is what i dont get

Quote:

---

Originally Posted by jxx2005

i have 3.52 m33
i want 3.52 m33#2
i cant understand the instructions in the read me
yes i can read it

Instructions: copy seplugins to the root of the memory stick. Extract the following prx of a firmware: /kd/popsman.prx, /kd/pops.prx, /vsh/modules/libpspvmc.prx and /vsh/modules/pafmini.prx and copy them to /seplugins/popsloader/ with names like popsman3XX, pops3XX.prx, libpspvmc3XX.prx, pafmini3XX.prx, where XX is 40, 51, or 52.

the bold part is what i dont get

---

To update, just place the update folder in 'ms0:/PSP/GAME150/' then run from GAME > Memory Stick. There is no need to do the bolded instructions to update.

cool
thanks

I was really skeptical about this firmware (coming from 3.40OE) but I installed it yesterday to see how it was. You know, this is not bad at all! Not as many bugs as I expected. Really good release, I'm sticking with it.

I have offical sony psp firmware 3.52 and i really want to get custom firmware, i have been looking all day for some but no luck :( i am going to try and purposly screw up my psp and then get a replacement, what software do they come with and is there anything ican do so i can keep my same psp instead of get a new one??
w/b
any1
:thumbup:

Anyone have a problem that once they have it updated and everything (to 3.53 M33-2) that when you cold boot the PSP (totally power down) it resets every setting to default? It won't let me keep the UMD setting, and goes back to 'Default' on the CPU settings as well.

Also, whenever I go into recovery, it resets my wallpaper (removes it) and I have to re-set it. Ugh...I dunno what I did or if this is a common error.

One thing that -might- be the reason why (I doubt it) is I replaced my flash0 with a backup I had, but was stupid, and did it with 3.40 OE. On a 3.51 M33. It semi-bricked me, but I ran the recovery thing and had to redo all my settings again, and it said I was running 3.40 again...so I re-updadted to 3.51, and then to 3.52 M33-2

EDIT: Well, the new option 'Format Flash1 and reset settings' apparently has worked for me, and the weird resets have stopped. Powered down several times now, and all is working well. Now if only I could get the CWCheat codes to work in puzzle quest :P

:mad: Hi, someone please help me?!?!:mad:

I am currently on 3.52 M33 but ...
How do i install the 3.52 M33 #2?

What are these plugins and where do i get them from and which one? Shown Below ...:confused:

" Extract the following prx of a firmware: /kd/popsman.prx, /kd/pops.prx, /vsh/modules/libpspvmc.prx and /vsh/modules/pafmini.prx and copy them to /seplugins/popsloader/ with names like popsman3XX, pops3XX.prx, libpspvmc3XX.prx, pafmini3XX.prx, where XX is 40, 51, or 52."

What exactly do i do, please help?

When you update to 3.52 M33 #2 ... does it say that on system info?

Thank You :)

You only need those files if you want to use the popsloader, which it doesn't seem you do for now.

You don't need them to upgrade. Simply put the 3.52-2 folder containing the EBOOT.PBP file in GAME150, then run from the XMB game menu. And yes, it will display M33 3.52-2.

So what exactly is the popsloader?
and where do i get the plugin files from?

Thanks for helping, really appreciate it.

So if i don't want to use the popsloader, i don't do any of the following below ... right?!!

"With this release we also a plugin to load pops from 3.40, 3.51, and 3.52.
The plugin works in 3.51 M33 and 3.52 M33. In 3.51 M33 you won't see option "3.51", and in 3.52 M33
you won't see option "3.52" (use original from flash for same firmware).

Instructions: copy seplugins to the root of the memory stick. Extract the following prx of a firmware: /kd/popsman.prx, /kd/pops.prx, /vsh/modules/libpspvmc.prx and /vsh/modules/pafmini.prx and copy them to /seplugins/popsloader/ with names like popsman3XX, pops3XX.prx, libpspvmc3XX.prx, pafmini3XX.prx, where XX is 40, 51, or 52.

Activate the plugin in recovery and done! First time you run a game, it will let you choose pops version.
Next time will remember configuration for each game; press R to change it.

The plugin doesn't apply to psn games."

After i run the eboot.pbp from xmb menu ... is there anything else i have to do?.
THANKS:thumbup:

The popsloader is if you want to use a different version of the official PS1 emulator. For instance, if you're at M33 3.52-2, you use the 3.52 popsloader by default, with all the fixes Sony has made for the official 3.52 firmware. Some games, however, work better on certain firmwares. That's what the popsloader is for. So if you don't use the PS1 emulator, or if all games work perfectly for you, you don't have to bother with this.

If you do want to try it out, you'll need to decrypt the whole firmware update file of the firmware you want the pops files from, then find the necessary files (which you mentioned earlier). Do this for all the firmwares you want to install the popsloader for, and rename the files accordingly.

Update: No, if you don't want to use the popsloader (you can still use the pops that comes with 3.52), you don't have to do anything more after patching to 3.52-2. :)

Thanks so much Blackrave!

sorry just one more thing.. i know im asking you a lot of questions but just in case i have to use the poploader later on. How exactly do i dycrypt the firmware and all these stuffs. Is it possible for you to send me a folder with all these files and tell me where to copy it because i like to stay up to date even if i don't use it.

Also, since the M33 #3 update is out ... would it automatically update the poploader?

Thanks ever so much!!

Get the latest firmware decrypter from the attachment here, or from here.
Find firmware updates here. Follow the instructions for the decrypter to decrypt and extract all files from the firmware.

3.52-3 isn't out yet. It will be tomorrow. It won't change anything in the 3.52 popsloader, but it seems the popsloader will now support 3.30 in the popsloader, so a new plugin will come with the package. The same decrypted files will be usable, though.

So Which firmware updates do i download?
Which one do you recommend?
Thanks

Can you please give me a link to that specific firmware?

Thanks

Can you also name me a game that does not work with 3.52 m33-2 .. so i can try it out .. if it doesn't work i may update the poploader but can you tell me which firmware i should decrypt and get the plugins from?

Thanks

someone plz answer the above 2 questions. thanks

1) don't double (or quadruple) post. It's rather annoying, and no one will answer your questions because you portray yourself as an idiot, who doesn't think the rules of the forum applies to him.

2) Google the firmware. You'll find it. As for what one, if you're not bright enough to READ the readme file with the download, then there's really no hope for you (Hint: it starts with 3.5)

3) as for a game that doesn't work with it? Who cares? If you don't own it, then you shouldn't worry about it. ISO talk and such isn't seen in a positive light around here. If all the games you legally own work, then you're fine.

4) popsloader is only for use in games that have a higher playability/compatibility (proven) in a specific firmware. personally, I've never had a problem with any of the games I play, so I've never had to bother with it.

Next time, be a little more patient, and use the EDIT button if you're the last one to post. All posting like an idiot does it get your treated like one.