I got my GPS-Receiver today. But I can´t get a signal from the satelit.
Printable View
I got my GPS-Receiver today. But I can´t get a signal from the satelit.
You might need to give a little bit more details.
-What kind of GPS-receiver did you purchase?
-What PSP do you have, and which FW?
-Which version of Mapthis do you use?
-Did you check the configuration in Mapthis?
Try to read the startersguide on the forum, it really helps you to get your mapthis up and running.
There's also a readme in the ZIP-file of Map-this you downloaded, also try to read that first
EDIT: INstruction-movie on how to get Mapthis! running
- PSP-290
- 3-71 M33-2
- MapThis0520
And how can I put in a street and city I want to drive?
ich² are you from germany?
I have MapThis! and a Map.
And here is no satelite in the "GPS Info Mode"
Well I don´t find anything that helps me. The only thing I can guess is a hardware problem? :confused:
Try to turn off your WLAN switch before you go into GPS mode and see if it helps.
I've never understood why turning off the wlan switch would help. Can someone explain that?
ich²: if you know someone else with a PSP, you can check your GPS receiver there. Be sure to copy exactly what you have on your memory stick, or just put your memory stick in that other PSP. If it does work, hardware problem, if it doesn't, software problem.
I turned the WLAN off but doesnt help. Why try another PSP? Is mit GPS Reveiver broken?
If you don't know what's wrong, you'll simply have to eliminate possibilities. If your receiver is indeed broken, it will also not work on another PSP. If it does, however, then your own PSP is probably "broke". (This may still be a key issue, search for Chilly Willy's Key Cleaner to solve that issue for PSP-290 receivers.)
Oh, what I said in the post above was a bit too simple. If it does work on another PSP, your own PSP may be at fault, not your GPS receiver.
Where can I get the Cleaner. Do you have a link?
I installed it but doesn´t work either =(
Put the program in GAME150 or GAME371 or try to change your kernel settings in recovery mode.
ich²: what exactly doesn't work? A simple "it doesn't work" really isn't enough. I think it'd be best to give an exact description of what you're doing. E.g.:
1. Put mapViewer directory in ms0:/PSP/GAME371/;
2. Changed system/config.txt to reflect my GPS receiver;
3. etc.
mapViewer is in ms0:/PSP/GAME371/
What should I edit in the Config File?
if you're using 0.5.20 version try to look in your config.txt for ENABLESERIALPORT, it must be 0 for psp-290..
Enableserialport=0
Does not work!
Can you see in the "GPS-Info" that the GPS-state is "on"?
If it does: Where do you test for the connectivity (i.g. in your house, outside)
If you test it inside your house, try to go outside, and be patient, it can take a while for the PSP290 to see some satellites, and to get a fix.
GPS State: ON
I testet it in house on the streets in bus :confused:
Can´t anybody help me? MSN or ICQ,Skype?
Here is exatcly what I do.
Put on GPS Receiver (PSP-290)
Start MapThis!
Select my Map
Bush the Square Button (GPS ON)
And wait for a Satelit Signal
:/
Yeah. I got it to work. Don´t know why but it does work.
Is it possible to make a map where I can enter the City and Street name and it navigates me there?
^^^
only if you're in the U.S i think. You get something called GEO DATA.
I'm in the UK so i dont know how it works properly. I assume it's quite simple to set up.
P.S
best way to get sattelites is this:
go into your mapthis software. Choose your map, e.g myarea
when it loads up and you're shown your map on the screen, press SQAURE on your PSP. You'll go into: ''GPS ON'' mode. Make sure you're outside your house. You wont get a good signal inside your house. If you're in an open are it's better rather than a forrest etc.
Then press START, go to GPS INFO. Watch the sattelites slowly but surely find you.
When they do, go to the option above GPS INFO, and tap X. It'll read your position and show you where you are on the map.
Simple :)
I´m from Germany so there is no Geo Data :(
Will it be possible in the future?
I will try it with "http://getroute.nieko.net/"
Just open the createt file and press square right?
You can download route files (which are POI files) through http://getroute.nieko.net/, which you can open using POI lookup. You don't have to press Square, as that enables GPS mode.
ich2,
just wondering how did u get ur mapthis work? i have exactly the same problem, running mapthis 05.2.0, fw3.71 m33-3, gps state = on
waited for a long time still no signal :/
can u help pls?
go outside... and wait.. i have psp slim with 3.71 m33-4 and it only takes me about 30-1 minute to get fixed on like 11-12 sats .. i always have 5 bars when connected/./
hello. i was following this thread as i got same problem
i got pspfat ta082 3,71m33-4 psp290. im from poland (wroclaw). i used different types of mapthises with different sets of configs. right now im on 5,20. got all settings way they shoould be. i mean i went thru alot of walkthroughs - wikis, those from here, from local websites.
i used chilly willy keycleaner.
after i enter mapthis,
i press square button - gps on i go to gps info. gps state: on, sat-in-view: 0. ofc i wait couple minutes. still nothing.
its anywhere i go street, home, work. doesnt matter.
i dont have an option to check if its faulty 290psp or other hardware failure. any ideas?