Big Trouble with this...

[NoQuarter]

Guy's can I go from 2.71 directly to 2.71SEB" without installing any of the other versions?
I think I'm gonna go for the golden firmware today

[M!ckeY]

No, you have to downgrade to 1.50, and then from there go to SE-B.

[Shrygue]

Guy's can I go from 2.71 directly to 2.71SEB" without installing any of the other versions?
I think I'm gonna go for the golden firmware today

I don't think so, as far as I know.

[NoQuarter]

Oh, so SE is installed from 1.5.
Well that's where I'm at now,do I need to do a clean 1.5 install cause my 1.5 firmware is heavily modded?

[M!ckeY]

I guess you could do that, to be on the safe side, but i have flashed SE-B many times when my psp was modded.

[Shrygue]

I'm not sure and wasn't so back when I decided to do this. For me, I downgraded to firmware version 1.0, got back to 1.50 using the official updater to clean install it and then made the mighty jump to 2.71 SE. I had no problems at all.

[NoQuarter]

Thanks guy's
If all goes well I'll be using 2.71SEB" by the end of the day

[M!ckeY]

good luck

[tuta]

Alright. I'm back from doing my work and im ready to give this another shot. First though, a few questions. Is Hen-C absolutely necessary to install before downgrading to 1.50? Is Hen C needed to install 2.71 SE from 1.50?

HenC is a homebrew enabler and it is needed for 2.71 I gave u a link to a full installation of HenC(along with reverse devhook) there and that shud settle all ur problems.If I am not wrong henC sometimes is a little funny out of 5 times u attempt to use it 1-2 times willl fail in this set henC will flash becoz by flashing it improves the success rate of henC search for the normal henC if u dun wan to flash I havent see a full setup before though only a faq on henB by razorak check it out if u want

2.71se now is still out of ur reach as it needs 1.5 coz 2.71 se is a hybrid firmware(mixture of 1.5 to 2.71).

As I said before play with henC first get a hang of it then attempt to downgrade.

[Feenux857]

Tuta, I'm already running 1.5. I finally downgraded. Is it possible to jumop straight to 2.71 SE-B'' from 1.5? If so, specific directions? I always try to follow teh readme directions, but sometime's they arent written too well.