My 360 Broke (AGAIN)

[Darksaviour69]

If you do try and fix it, why don't you take a few pics while you do it and write a tutorial, and post it on the site

[Eviltaco64]

If you do try and fix it, why don't you take a few pics while you do it and write a tutorial, and post it on the site

Will try, first I have to find a torx-10 screwdriver
I literally had the 360 down to the case with only the top plastic part on, then I found out that 360 uses torx instead of phillips
Once I do find a torx, however, I might also make an original Xbox tutorial as well, as I have 2 and my main one (which is softmodded) has a broken DVD rom.

[pibs]

dude are u checking out the site i posted here?

it has one of the best guides seriously it helped me fix 2 RROD 360s

heres all I needed for the fix (not including tools)
===================
4 5x20MM Panhead Machine Screws (Keep length between 20 and 40 MM)
4 5x15MM Panhead Machine Screw (Must be no longer than 15MM!)
44 #10 Washers
===================

And for your English measurements
***********************
4 3/16" x 1" Panhead Machine Screws
4 3/16" x 1/2" Panhead Machine Screws
44 #10 Washers
***********************

It cost me about 10 bucks at my local hardware store for the supplies.

While ur at it you can install a new fan, I installed a talismoon one cuz i digg the blue colored fan and it looks great with a clear case.

[Eviltaco64]

dude are u checking out the site i posted here?

it has one of the best guides seriously it helped me fix 2 RROD 360s

heres all I needed for the fix (not including tools)
===================
4 5x20MM Panhead Machine Screws (Keep length between 20 and 40 MM)
4 5x15MM Panhead Machine Screw (Must be no longer than 15MM!)
44 #10 Washers
===================

And for your English measurements
***********************
4 3/16" x 1" Panhead Machine Screws
4 3/16" x 1/2" Panhead Machine Screws
44 #10 Washers
***********************

It cost me about 10 bucks at my local hardware store for the supplies.

While ur at it you can install a new fan, I installed a talismoon one cuz i digg the blue colored fan and it looks great with a clear case.

I was considering getting an ocean blue see through case and the green fan, the fan will match the front LED and overall, it'll look awesome

[Eviltaco64]

Ok, I have everything now.
How do I do this?
Should I glue the erasers to the chips and put it back in its case?

[dcdood]

Me and my brother share the 360, We're on our 3rd one (due to Microsoft) :P. I'm not one to open up my game consoles but i has anyone tried the blowdryer trick? i seen it on youtube, You open the 360 and remove drives and other stuff, take the board from the case, and use a blow drier or something that can produce heat like that, as long as you keep it at an equal distance, it shouldn't hurt.

[Eviltaco64]

Ok, an update.
I followed the eraser fix multiple times with different erasers and everything...no luck.
I still get sound however, and now I've found out that heat actually fixes the video.

I remember the last time my 360 broke, people told me to wrap it up in a towel until it got the rrod. Well, I eventually gave up, and hooked it back up, and it worked. I also read on many sites that this has worked for others as well.

So Im going to do all that, and get back to you.

UPDATE: My Xbox 360 is running 100% again.
I sent requests to a few people.