You'll need to be more specific. What do you mean by the solder came away? Just re-solder that part if it isn't connected anymore.
Also, I would guess that the wire is necessary if they put it there...
I was wondering if anyone has any advice... I just tried to solder a D2C chip wire to the F connector on the board, and all the solder came away, does anyone have any ideas of what I can do to a. fit the required wire, and b. do I need that bit of solder on the board for it to work.
Is the wire needed to chip the Wii?
Cheers
Snowmonster
You'll need to be more specific. What do you mean by the solder came away? Just re-solder that part if it isn't connected anymore.
Also, I would guess that the wire is necessary if they put it there...
On the circuit board there are pre soldered blobs, the one I was trying to attach the Wii chip wire to, basically, isn't there anymore, as it melted away. How now do I attach the wire from the Wii chip to that piece? Is the hole that is next to it, where the solder lead to? Can I solder the wire to that?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks