PSP wont boot UMD or EBOOT...

[zeritooverride]

Yesterday I got a PSP Fat from a friend that was upgraded to 4.01 m33-2 using DC7, but now it wont boot games or homebrew at all, it freezes on the white psp screen and then shuts off, also I wont read the UMD and he says it was working fine.

Is there a way to fix this or is it doomed?

[Qmark]

DDC it again.

[zeritooverride]

Already tried despertar del cementerio again, and again, and again, and it still does the same...

[Wally]

Reformat Flash1.

Wally

[zeritooverride]

I tried reformatting flash1, the unit crashed when trying to exit recovery, still not booting anything.

[Wally]

Sounds like the IDstorage has gone kaput.

Try this
1. Backup your nand
2. Open DC7 and navigate to NAND operations/IDstorage/create new idstorage.

Tell us if that works.

Wally

[zeritooverride]

Well that didnt work either, I think this PSP is just as good as a brick , anyway thanks for the help.

[Buddy4point0]

"Upgrade" to 1.5 using the recovery menu.
Then upgrade to 5.00 m33, and then 5.00 m33-3.
Backup your memory stick and format you memory stick and flash1.

Your PSP is far from bricked.

[zeritooverride]

"Upgrade" to 1.5 using the recovery menu.
Then upgrade to 5.00 m33, and then 5.00 m33-3.
Backup your memory stick and format you memory stick and flash1.

Your PSP is far from bricked.

Im losing all hope here, tried doing that, it just crashes at the recovery screen, doesnt move, doesnt do anything, only way to shut it down is taking the battery out.

[Buddy4point0]

Im losing all hope here, tried doing that, it just crashes at the recovery screen, doesnt move, doesnt do anything, only way to shut it down is taking the battery out.

Can you still activate flash0, flash1, flash2, and flash3 though the recovery menu?
If so I we can try and see if flashing my PSP's flash to yours will fix it. I'll happily upload it for you to save a fellow homebrewer. (it's 5.00 m33-3)