Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 36

Thread: Etch A Sketch 1.0

                  
   
  1. #21

    Default

    Etchasketch never worked for me. Probally cause my dog took a bite out of it.

  2. #22

    Default

    im guessing that this doesnt work on 2.8

  3. #23
    DCEmu Old Pro BL4Z3D247's Avatar
    Join Date
    Jun 2006
    Location
    BL4Z3D 24/7 in CT
    Posts
    1,970
    Rep Power
    83

    Default

    ^nope, sorry

  4. #24

    Default

    When i put it on my psp it says that its a currupt data....wtf is up with that?

  5. #25
    DCEmu Newbie
    Join Date
    Dec 2006
    Posts
    4
    Rep Power
    0

    Default

    rarr

  6. #26
    DCEmu Newbie
    Join Date
    Dec 2006
    Posts
    4
    Rep Power
    0

    Default

    lknKclnASKncadkn ya ginger basteds http://wwww.dot.dot.dot.djasdfojihOH...FOIFH **** OFF **** OFF
    UR GAY SED U
    ahhhar ya basteds

    Safety First
    Propane torches or an open flame can ignite wood beams, flooring and other combustible materials around pipes. Use a hair dryer to thaw frozen pipes. Pipes that warm too fast can break.




    If you think a pipe already has frozen, do not wait for nature to take its course, thaw the pipe as soon as possible or call a licensed plumber for help.


    Open all faucets.
    One or more pipes may not be completely frozen and even a small water flow might thaw the obstruction.


    If that fails ...
    Use a hair dryer to heat the pipe where you suspect the freeze has occurred. Propane torches are dangerous and can cause fires, not to mention that a frozen pipe can crack or break if warmed too quickly.

    Make sure the taps are openwhile the pipes are heated in order to remove all the ice in the system once the main blockage is eliminated.


    If you have a basement
    Locate the spot where the water pipe enters the home. See if this pipe passes through a non-insulated area such as the "ribbon plate" right above the walls. Apply heat to any suspect area.


    If you have a crawl space
    Look for any area where cold air can enter. Apply heat to all sections of pipes located in this area.


    If you live in a mobile home
    There is a greater chance the main supply pipe will freeze at the point where it enters your home. Apply heat directly to that pipe if possible, from the point where it leaves the ground to where it enters your mobile home.

    If you can not access the pipe, use a heater with a strong blower, such as a construction site torpedo type heater. Many rental companies have them.


    If you don't have a hair dryer
    Use a heat lamp or electric space heater, but be careful you don't overload the circuit, and make sure the outlet is properly grounded to prevent electrical shock. Where possible, plug the appliance into a ground fault interrupt protected outlet.


    If you feel you really must use a propane torch

    - Never use a propane torch on PVC pipe, they can melt and burn.
    - Never use a propane torch near a gas line, an explosion, erious injury or death could result.

    Remember: When thawing, slow is best. Heating up frozen pipes quickly can cause the pipe to crack or break.

    Be especially careful not to let the flame come in contact with any wood or surrounding flammable material. Many fires are caused by accidents which occur through carelessness, and because a ready supply of water is not available due to the obstruction. Keep a fire extinguisher close at hand.

    A good idea is to surround the area to be heated with "sheet rock" or gypsum board (drywall), but keep in mind that these are paper-coated.


    Once the obstruction is cleared and the water is flowing again, turn off all faucets and check for leaks in the area where the obstruction occurred. Any leaks you find should be repaired immediately. If you cannot repair them yourself, call a professional


    ahahahahahahahahaha **** u

  7. #27
    DCEmu Newbie
    Join Date
    Dec 2006
    Posts
    4
    Rep Power
    0

    Default

    UR A GINGERBASTED YEA UR A GINGER BASED YEA...HO HO HO ****IN HO MERRY FUKIN CRISTMAS YAZ GINGA BASTEDS! FUKC U U U UWWW.NJSDVJKBHSFVBJKFVNJSFVGNJSFGJNSFGJNFSG.....YA GINGERBASTEDS.COM


  8. #28
    DCEmu Newbie
    Join Date
    Dec 2006
    Posts
    4
    Rep Power
    0

    Thumbs up

    Quote Originally Posted by Treedognite View Post
    When i put it on my psp it says that its a currupt data....wtf is up with that?
    <<<<---HAHAH UR GYA AND GINGER


    :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: <<-- THTSD U YA GINGER BASTED:thumbup: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :

    UR GYA AHAHAHAHAHA]

  9. #29
    DCEmu Rookie Project.funky's Avatar
    Join Date
    Sep 2006
    Location
    UK, Manchester
    Age
    33
    Posts
    129
    Rep Power
    68

    Default

    is there a way to reset this thing?

  10. #30
    DCEmu Rookie Project.funky's Avatar
    Join Date
    Sep 2006
    Location
    UK, Manchester
    Age
    33
    Posts
    129
    Rep Power
    68

    Default

    Quote Originally Posted by LilSwish722 View Post
    im guessing that this doesnt work on 2.8
    Yeah this works on 2.8 :\ i got it working, do you have eloader?

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •