switch contacts

[moody_gaz]

A nephew of mine has tried to change the power switch on his DS lite and has lifted the solder tags off the board at contacts 2 and 3 ( the two middle contacts) is there any way to fix this in order to fit a new switch?

[VampDude]

There is nothing on Google about that specific problem, but you can buy a new switch on eBay for very little £1.50/$2 depending on where you are located.

I'm guessing that where you purchase the replacement switch, there will be a guide on fitting it (many respected sites have guides with their items).

[knifemind]

If you pulled the pad off the board, then you must clear part of the trace and connect to that. Go here ..http://soldering.tehskeen.com/ ...& scroll down to the section on traces. You'll get the idea.