eloader questions

[tallica]

ok before i start id like to say sorry for the noob questions. ok so i have a mac and i just downloaded eloader but im confused about where to put the files =s and yes i read the readme. also can i install the eloader so it doesnt load when i start gta? finaly what is the latest vesion of eloader? i have fw 2.60 btw

[tallica]

can some1 please answer? i really want to use homebrew

[pspcross]

http://forums.qj.net/showthread.php?...highlight=dgen

also i used the auto installer for windows.

but for mac i suppose you need to use the zip hence the name. but all the files location must be in the readme attached.

bock 0.97 is the latest version and i have firmware 2.5.

[pspcross]

http://www.dcemu.co.uk/vbulletin/sho...4&postcount=23

thought you said you read the readme file ???

another thing when the psp is transferring data make sure it all transfers before you disconnect.

the led will flash initially then stop but it will flash again a few seconds after this. only then have all the files been tranferred.

i found this out by accident. could have been the reason for some homebrew probs i had before.

since i have waited for the second flashes i haven't had any problems.

good luck

[tallica]

im sorry but that measns nothing to me i just dont understand this:

\l_097.bin
\README.TXT
\psp\eloader\loadmenu097.pbp
\psp\eloader\loadmenu.tga
\psp\eloader\loader097.cfg
\psp\eloader\gta200.nid
\psp\eloader\gta250.nid
\psp\eloader\gta260.nid
\psp\eloader\vsh200.nid
\psp\photo\eLoader 097\aaa.gif
\psp\photo\eLoader 097\run_097.tif
\psp\savedata\ULES00182S5\DATA.BIN
\psp\savedata\ULES00182S5\ICON0.PNG
\psp\savedata\ULES00182S5\PARAM.SFO
\psp\savedata\ULES00182S5\PIC1.PNG
\psp\savedata\ULES00182S5\tetris.bin
\psp\savedata\ULUS10041S5\DATA.BIN
\psp\savedata\ULUS10041S5\PARAM.SFO
\psp\savedata\ULUS10041S5\PIC1.PNG
\psp\savedata\ULUS10041S5\icon0.png
\psp\savedata\ULUS10041S5\tetris.bin
\psp\savedata\ULES00151S5\DATA.BIN
\psp\savedata\ULES00151S5\ICON0.PNG
\psp\savedata\ULES00151S5\PARAM.SFO
\psp\savedata\ULES00151S5\PIC1.PNG
\psp\savedata\ULES00151S5\tetris.bin
\utils\EBOOT_signature.exe
\utils\touch.exe

i put these files in the mp_root folder:

\l_097.bin
\README.TXT
\psp\eloader\loadmenu097.pbp
\psp\eloader\loadmenu.tga
\psp\eloader\loader097.cfg
\psp\eloader\gta200.nid
\psp\eloader\gta250.nid
\psp\eloader\gta260.nid
\psp\eloader\vsh200.nid

i put these in the photo folder:

\psp\photo\eLoader 097\aaa.gif
\psp\photo\eLoader 097\run_097.tif

i put these in the savedata folder:

\psp\savedata\ULES00182S5\DATA.BIN
\psp\savedata\ULES00182S5\ICON0.PNG
\psp\savedata\ULES00182S5\PARAM.SFO
\psp\savedata\ULES00182S5\PIC1.PNG
\psp\savedata\ULES00182S5\tetris.bin
\psp\savedata\ULUS10041S5\DATA.BIN
\psp\savedata\ULUS10041S5\PARAM.SFO
\psp\savedata\ULUS10041S5\PIC1.PNG
\psp\savedata\ULUS10041S5\icon0.png
\psp\savedata\ULUS10041S5\tetris.bin
\psp\savedata\ULES00151S5\DATA.BIN
\psp\savedata\ULES00151S5\ICON0.PNG
\psp\savedata\ULES00151S5\PARAM.SFO
\psp\savedata\ULES00151S5\PIC1.PNG
\psp\savedata\ULES00151S5\tetris.bin

i put these in the mp_root folder in a folder called utils:

\utils\EBOOT_signature.exe
\utils\touch.exe

where have i gone wrong? i just get a blank screen when i load it up

[pspcross]

unzip the file "eloader097.zip" to your computer.

get a new folder like the attached picture.

now this has all the right files in the right folders.

all you have to do is copy all these and paste them

to the route directory of your psp.

if possible do a format of your memory stick before you start. ( remember to backup anything off your Mstick you need).

all the files should then be in the right places.

hope this helps.

by the way when i say root folder i mean the drive which shows up when you connect your psp.

FYI mp-root is a folder within your root folder

see other attached pic