Does "Undiluted Platinum" support PSP new ver. hardware(TA-082) ?

***wraggster*** · June 12th, 2006, 01:05

Ookm posted this over at his Blog:

Because Actel ProASIC Plus FPGA just support 3.3V/2.5V BUT PSP new ver. hardware(TA-082) use 1.8V !!

Does anyone can confirm it ?

What does this mean, well at the moment i dont know what to think but those more tech savvy than me will know for sure, inform us all via the comments

**Zion** · June 12th, 2006, 01:11

Hopefully it will support all versions

**emuking** · June 12th, 2006, 01:46

i think it just means only old psps will work

**Zion** · June 12th, 2006, 01:49

That would be sickening for people with new PSP's

**Larry** · June 12th, 2006, 01:50

it specifically mentions it works on all versions.

depending on your version probably decides installation instructions.

like if you have an 082, you solder to one point, if you have an older version you solder to another point
changing the volts is easy.

**Zion** · June 12th, 2006, 01:55

Thats good

**Harshboy** · June 12th, 2006, 01:56

same as xbox. You solder to different spots depending on which version you have

**vettacossx** · June 12th, 2006, 03:19

LMAO so NOW you can see why i made this thread the day 2.71 was released

WILL MODCHIP WORK WITH 2.71 firmeware?? - DCEmu :: The Homebrew & Gaming Netwo

**DenofLions** · June 12th, 2006, 10:09

Originally Posted by vettacossx

LMAO so NOW you can see why i made this thread the day 2.71 was released

WILL MODCHIP WORK WITH 2.71 firmeware?? - DCEmu :: The Homebrew & Gaming Netwo

Its not really a firmware related thing Vetta, but different setups in the hardware. I really don't think changing something in the firmware could stop a hardware mod like the chip, but future hardware tweaks by sony could atleast delay the release of another chip for that revision.