Easy downgrader 2.50/2.60

**Zekk41123** · September 14th, 2006, 06:28

Thanks Tallica, I couldnt find the Downdater or what not to get down to 1.5 from 2.6 i used to have to go from 2.0 to 1.5 which wasnt all that bad but now i can play newer PSP games when i am not feeling Brewey

Originally Posted by tallica

Use my guide http://www.dcemu.co.uk/vbulletin/showthread.php?t=33069

**sven ebens** · September 14th, 2006, 17:38

can somebody explane how it works iam a noob i have looked in my umd drive on the green thingy it says nothing is that good or bad and is this a downgrader or do i need more stuff to downgrade and where can i get that

**sven ebens** · September 14th, 2006, 19:18

I did it and it worked

now stuff i wanna know are wich iso loader is the best and where to download and do i have to format my psp now?

**Minasodrom** · September 17th, 2006, 11:04

hi, i have googled several sites and found out that th ic6001 model can be downgraded, allthough it had 2.5/2.6 preinstalled. is that right?
if you downgraded your psp with this downgrader, will you be able to update it with the normal updater again or will the firmware be wrecked??

thx

**punkpie** · September 17th, 2006, 12:17

Ran this last night. Went through the whole black screen process, mem card flickered for a few minutes then the screen went black and just stayed there. I left it for 10 - 15 mins like that.
It didn't reset, I didn't get the cannot load message. Now the PSP does nothing when powered on.
I checked everything. It was fully charged, plugged into ac adapter, was a 2.5 firmware updated to 2.6, had all the files in the right place on the memory stick and had a 1.5 dump in the correct place and it didn't work.

Is there anything I can do?

**mandeep22** · September 17th, 2006, 16:06

DOES IT WORK for psp with TA082 motherboard ?

**mandeep22** · September 17th, 2006, 16:15

Originally Posted by punkpie

Ran this last night. Went through the whole black screen process, mem card flickered for a few minutes then the screen went black and just stayed there. I left it for 10 - 15 mins like that.
It didn't reset, I didn't get the cannot load message. Now the PSP does nothing when powered on.
I checked everything. It was fully charged, plugged into ac adapter, was a 2.5 firmware updated to 2.6, had all the files in the right place on the memory stick and had a 1.5 dump in the correct place and it didn't work.

Is there anything I can do?

Have you checked if your psp is not A TA082. Search forums to learn how to confirm if your psp is a TA082 motherboard psp. When u open UMD drive look on the upper corner of inside the umd drive just below the IRsensor. If it has a number IC1003 , dude your psp is BRICKED. And it means its dead so u got to install new motherboard costing 100$ approx!!

So just pray it aint TA082 and open ur UMD if you already have not done so

**dejkirkby** · September 17th, 2006, 16:19

PunkPie> Golden Rule #1- Check that you ain't trying to downgrade a TA-082. Sucks if you have bricked. But it ain't like the warnings are hidden.
I just downgraded another PSP using this. That's like 6 or 7 now.