WiFiController v0.2

[fistikuffs]

I'm sorry I don't really see what you are talking about. Do you mean that after we open the program there is supposed to be a button that says "add now?" If that is the case then I don't see it. Also I don't know what the deal with the control panel is. When I go there I don't see anything about the joystick so instead I just go to the programs list. Does that make a difference at all? Thanks in advance.

Hi. Try again except this time put a full stop between add and now

[Hungry Horace]

hmmm - i get the previously mentioned "sceNetApctlCOnnect returns 80110601 " error.

is there anything i can change on the router to get it working? port forwardng etc ?


(the psp wifi light doesnt even flicker though ?)


help appriciated!

[mavsman4457]

Hi. Try again except this time put a full stop between add and now

Touche and thank you. It's amazing what correct punctuation can do for someone.

[end3rbr0]

can anyone get back to me on what they think the problem might be with using two psp's as wireless controllers, I can get player 1 to work fine, but can't ever get two going at the same time, some help please I will bear your first born if you can answer this question.....

[mavsman4457]

I don't think that this program could handle two different PSP's because it is probably not programmed into it. You could however try the other program that uses the PSP as a controller. It's not as good but that's ok. I'm sure that the programmer of this application will take your request for 2 PSP's into consideration.

[Hungry Horace]

the other one is the one i'm using.... it's ok... it maps to keyboard buttons, but theres no analogue stick control.

no one can help me out in solving the error i'm getting on the PSP end of things?

[lorddedrik]

ok i did all the steps in the readme and i have the sockettest.exe program running on my computer and i have both the wifi card on my computer (with the ip 192.168.1.11) and the wifi on my psp turned on with it set to use the same ip in the wifi.cfg file but when i run the program on the psp it says on the psp screen

WifiController: Connecting...
connection state 0 of 4
connection state 2 of 4

and thats where it stops and it doesnt work. any ideas on whats wrong?

another thing. after this information shows up on the psp screen the wifi light on the psp flashes once.

[e-klipse]

I take it wifi cards don't come with computers. Idk if i have a wifi card or not and i did everything but it says sceNetApct1Connect returns 80110601.

[beefypotatoes]

To people having trouble with the triangle button not working in games:

When mapping the gamepad set it to 9 buttons instead of 8 (Step 9). Next, assign the buttons to be like this: (Step 11)
Button 1 = nothing
Button 2 = Digital 0
Button 3 = Digital 1
Button 4 = Digital 2
Button 5 = Digital 3
Button 6 = Digital 4
Button 7 = Digital 5
Button 8 = Digital 11
Button 9 = Digital 10
(the nothing option is at the bottom of the button list)

Changing that made the triangle button work for me.

[Hungry Horace]

I take it wifi cards don't come with computers. Idk if i have a wifi card or not and i did everything but it says sceNetApct1Connect returns 80110601.

you'll notice the wifi light on the PSP doesnt flash though.... so even if you did have a wifi card, it should attempt to connect to something and fail, rather than returning this fault.

i hope this gets looked into, because the LUA based one i tried out was rather laggy, and i'm geting the same fault as you are on this one.