Help with Devhook

[Maxdamantus]

Hahaha so true. Also messing with R7 pretty sweet, if it increases again like this then its going to be up to full speed next update!

You can pretty much run up to 2.71 on full speed, just open iRshell, set the CPU speed in iRshell to 333Mhz, then press square until you go into the memory stick directory (Devhook doesn't seem to show up in "Homebrew"), then browse for Devhook, the one starting with the underscores, start up eboot in there, set the Speed to 333Mhz, with other normal settings, and should boot up at 333Mhz.

[dejkirkby]

You can pretty much run up to 2.71 on full speed, just open iRshell, set the CPU speed in iRshell to 333Mhz, then press square until you go into the memory stick directory (Devhook doesn't seem to show up in "Homebrew"), then browse for Devhook, the one starting with the underscores, start up eboot in there, set the Speed to 333Mhz, with other normal settings, and should boot up at 333Mhz.

Thanks for the help dude, but i think he was talking about the R7 release of the N64 emu, Daedulus

[ACID]

I had devhook running on my PSP and then my Lumines ISO messed up. I have tried reinstalling it and now I get to Devhook, choose a iso and then run it at the correct settings and my PSP screen goes black and then turns off. I put the PSP folder in and the DH one and I ran the firmware installer for v1.5 which is what I have. What am I doing wrong?

There should be no talk of isos here