UniversalRemote help

[TriGGERtheFunz]

i need help with UniversalRemote on 1.5 it just say goobye whats going bad

[tallica]

universal remote sux! get ir commander i have it and it works like a dream.

[TriGGERtheFunz]

where can u get it and does it work with all tv's like jvc

[donne]

Dear all,
how can I use this ircommander (ver 8) it seemed I can't get it to work on my philips DVD, Sony TV and LG TV.. Said I must put a rdf file something but where can I found it ?

Or better yet.. Please give us a guidance to use it..

[tallica]

Tallicas guide to IR commander
----------------------------------------------------------------

(1) Download ir commander from here http://www.dcemu.co.uk/vbulletin/sho...ht=turn+remote

(2) Unzip the download and put the folders in the Game folder on your memory stick.

(3) Load up IR commander from the xmb and see if your lucky enough to have a device with a pre installed .rdf file.

(4) If you dont have any of the devices go to this site http://www.remotecentral.com/cgi-bin/codes/ and search for your tvs codes.

(5) When you find the codes you are looking for open up the panasonic.rdf file and use it as a template. if you cant open the file open it with notepad.

(6) Open notepad and create functions (using the panasonic as a template) ie

CROSS=off
Your code for off here

(7) When you are finished go to save as and save it as a .rdf file.

(8) Drop your file into the folder without the %.

(9) Load up IR commander again and choose your file.

(10) Point the infrared (beside left sholder button) on the psp in a direct line with the tv and press a function.

(11) Have fun using your psp as a remote.


If you have any questions ask here and i will try to answer them as best i can.

[jmassa25]

Tallicas guide to IR commander
----------------------------------------------------------------

(1) Download ir commander from here http://www.dcemu.co.uk/vbulletin/sho...ht=turn+remote

(2) Unzip the download and put the folders in the Game folder on your memory stick.

(3) Load up IR commander from the xmb and see if your lucky enough to have a device with a pre installed .rdf file.

(4) If you dont have any of the devices go to this site http://www.remotecentral.com/cgi-bin/codes/ and search for your tvs codes.

(5) When you find the codes you are looking for open up the panasonic.rdf file and use it as a template. if you cant open the file open it with notepad.

(6) Open notepad and create functions (using the panasonic as a template) ie

CROSS=off
Your code for off here

(7) When you are finished go to save as and save it as a .rdf file.

(8) Drop your file into the folder without the %.

(9) Load up IR commander again and choose your file.

(10) Point the infrared (beside left sholder button) on the psp in a direct line with the tv and press a function.

(11) Have fun using your psp as a remote.


If you have any questions ask here and i will try to answer them as best i can.

i recently downloaded this software and followed all the instructions, but my PSP shows this program as "corrupt data" please help

[BSM911]

same