A guide to Dark_AleX's Custom Firmware, by The EX

[BL4Z3D247]

just wanted to say something about the guide, its a great guide, only in the guide u install the AIOmod.prx AND the mp3plugin, but the mp3plugin wont work with the AIOMod installed.. mp3plugin wont work with any mod using usb...

really it works for me, u have to remove the custom fw then put the mp3XMB folder in the root of ur MS then put the custom fw back on thats how i got it to work

[d3v1l]

didnt get it to work, googled the plugin, found slasher sayin it himself in a post on sum other site..
here is his post at qj.net: 24. » and...

I would also like to comment, that when using a USB-related module in conjunction with my mp3 program; it WON'T work. It will likely freeze if you use both a USB activating module & my mp3 plugin at the same time. Thanks.

by Slasher (

[BL4Z3D247]

ok well this is how mine works, with the # removed in the config.txt for the mp3XMB the mp3 module works but the auto usb mode doesn't then when i put the # back in the config.txt for the mp3XMB the auto usb turns back on, so they don't work together but they work and they're both installed u just have to remove/add the # on the module line the mp3XMB is on to toggle between modules

[d3v1l]

ur probably right yea..i had em both without the # n then my mp3 didnt work..so yea they dont work together..hopefully it will be added to the guide

[The EX]

ur probably right yea..i had em both without the # n then my mp3 didnt work..so yea they dont work together..hopefully it will be added to the guide

I don't really understand what you mean, if you can make your own understandable bit of text about this then I'll add it!

[d3v1l]

ok:P i ment: if you have installed both the AIOmod.prx AND the mp3plugin by slasher, then you will have to choose which one to have enabled in the config.txt in psp/system, by adding a # before the loadmoduleX(see CHAP2) , because having both the AIOmod.prx and the mp3plugin will cause the mp3plugin to NOT work... something like that:P

[The EX]

Ok, i'll add that now...

[d3v1l]

just seen it added i hope that will fix a lot of questions...qj.net was full of questions about this..

[The EX]

lol, well I hope so too!

[BL4Z3D247]

################################################## ########
##Configuration file for Harleyg's custom firmware patch##
################################################## ########

# Set to true to run non kxploited eboots (1.00).
nokxploit = true;

# Set to true to hide corrupted icon, may cause slowdown.
hidecorrupt = true;

# Set to true to skip the Sony intro and stop auto exec of umd.
skiplogo = true;

# Hold left trigger to boot into last used firmware on devhook
devhook = "ms0:/PSP/SYSTEM/DEVBOOT.PBP";

# Set this to the application you want to start when holding X on boot (add # to remove)
autoboot = "ms0:/PSP/GAME/pspvba/EBOOT.PBP";

# Extra PRX's to load on boot.
loadmodule0 = "ms0:/PSP/SYSTEM/AIOMod.prx"
#loadmodule1 = "ms0:/mp3XMB/RUNMEmp3.prx"
loadmodule2 = "ms0:/PSP/SYSTEM/vshex.prx"
#loadmodule3 = "blahblah"
#loadmodule4 = "blahblah"
#loadmodule5 = "blahblah"
#loadmodule6 = "blahblah"
#loadmodule7 = "blahblah"
#loadmodule8 = "blahblah"
#loadmodule9 = "blahblah"

thats my config...if u KEEP the "#" before the #loadmodule1 = "ms0:/mp3XMB/RUNMEmp3.prx"(like so) then the AIOMod.prx WILL work but the mp3XMB module WON'T, if u KEEP the "#" before loadmodule0 = "ms0:/PSP/SYSTEM/AIOMod.prx" the mp3XMB WILL work but the AIOMod.prx WON'T

also with the vshex.prx, it works different with the other modules as well...when u use it with AIOmod.prx activated it runs at 333mhz all the time, but when u use it with the mp3XMB module u can toggle thru 133,222,266,333 mhz