Plz some one help me
i wht to install this for the recovery mode i ready have the hen c and reverse dev hook on me 2.71 and i have the auto installer but what option do i use??????
or should i format my memory stick and install evryting if soo wht option is that???lol plz help
HarleyG's is for 1.50.
If you want Recovery console on 2.71 you must get Dark_Alex's 2.71 Special Edition rev A. (Recovery is coded by HarlyG, BTW)
ohh ok
lol i have the instaler now wht option do i use
1. Install the SE-A and DevHook for 2.71
2. Install SE-A and DevHook for 2.71 with 1.50 firmware
3. Just the SE-A
4. Just DevHook for 2.71
lol
those are the options for the 2.71 special firmware i have the reverse firmware already installed but i want to install the special firmware for 2.71 now wht option do i chose for my situation???
1. Install the SE-A and Dev Hook for 2.71
2. Install SE-A and Dev Hook for 2.71 with 1.50 firmware
3. Just the SE-A
4. Just Dev Hook for 2.71
its that simple this is for the 2.71 special firmware revision A
if you have 2.71 and HEN-C you cannot put in any custom firmware. if you have a NON TA-082 BOARD you can downgrade to 1.50 and install 2.71 SE-A which comes w/ a recovery mode.
How do i know if i have a TA-082 BOARD???
grab a flashlight....pop open your umd drive like your going to insert in a game....shine the flashlight inside the psp, at the TOP RIGHT on a green section of the board, if you see IC1003 upside down...its a ta-082. otherwise, no.Originally Posted by Vendeta
http://0okm0000.googlepages.com/TA-082-3b-1.jpg
there is a pic of where it is, although most of that will be covered by the UMD drive door...still, its in the upper right corner and is visible easily with a flashlight....if you see just green, you're good. otherwise, IC1003 upsidedown, nopers! you are beat![]()
i see green ther but if i look to the left ther is a number barly visible???
ic6001
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks