Dark_Alex 2.71 SE-C Easy Installer 1.0

[gunntims0103]

new release via gaming.homebrew

This is the awaited 2.71 SE-C easy installer 1.0 . This will allow you a easy more safe way to install 2.71 SE-C. This was released via a german site so the translation might be a bit choppy.

It says that the Read me is in german. SO a translation will have to come soon. I don't quite understand it myself. If anyone can download and translate it would be much appriciated. The Read Me is very iimportant and i don't advice that User's go ahead without reading it.

Thank you

-don't try any of this on a TA-082 motherboard!!!

-Make sure your PSP is FW 1.5. There's a bunch of stuff about the prior SE-B version that the weblator had a hard time understanding*, but the gist of it revolves around having 1.5 on your PSP. So the safest bet is to have 1.5 on your PSP.

-find someone who can understand German. Readmes are very important.

hopfully the Read Me will be translated in english soon, the download is to big to be uploaded here so you'll have to download via the link provided.

download link and give feedback via comment
download via gaming.homebrew

[siulmagic]

you dont need 1.50, you can upgrade from 2.71 b'' i will explaine how to
first
get the 1.50 and 2.71 frimware updates

second place both of them in the seupmaker folder

third run the se maker it will generate the dxar file

forth place the generated dxar file in the seupdate folder

and finaly run the updater it will flash SE C thus deleting all previous modification to the psp and ofcourse SE B" too i hope that help i got no time to make fancy tut so if enyone wana make it go ahead

[ExcruciationX]

You do not need 1.50 to do this. I just finished my tutorial that shows the installation process, and I just ran it with 2.71 SE-B'' and it installed fine.

Note, it will freeze for a little bit when it get's to 10% on the "Writing 150 subset". Just keep that in mind.

[siulmagic]

thats what i said <_<

[Gene]

i want to upgrade to se c but i am kind of scared because i have never tried custom firmware. please help me

are these all the files that i need to get se C working?

i have a 1.5 psp and i really don't know how to do anything with this 2.71 se
thanks

[SnoopKatt]

Just charge your PSP to 100% and keep it plugged into the wall and you'll be fine. I just went to SE-C, but I haven't tried anything yet.

[Gene]

there are two exe's in the download link wich one do i use?


i will defiately wait until the read me is at least understandable in english because i have concluded this is far too dangerous if done wrong, as it is. without the read me, which is a bit too long for some simple guide, i'd have to say that this could be an extremely easy way to brick the hell out of my psp

[kayhanbakid]

i am extremely terrified of this. i would never try it unless it was absolutely necessary. ill stick with 1.5

[ExcruciationX]

i am extremely terrified of this. i would never try it unless it was absolutely necessary. ill stick with 1.5

This is exactly why I made my video tutorial. It is to help people with too-chicken-to-install-golden-firmware-phobia.

Don't worry, you will be fine! Just keep you're PSP plugged into you AC adapter, and create a clean DXAR file.

[dajusi]

Can you please remove that bit of news?

As dcemu would never link to sites hosting illegal files, I think you should know that inside that package is the data.dxar, providing it is against what sony's licensing.
As qj already put it down, you should probably do the same...