[OLD] PS3 Sixaxis Controller Can Be Used In Windows!

**tttyyyyyyyy** · July 21st, 2008, 17:18

So I still can't get this to work after a year. I did everything it says, and it doesn't work. Tried running it through cmd, it crashes. Why hasn't there been a more stable version?

It recognizes it in the hardware properties, but it's not allowing me to do what I want it to do. Am I supposed to put the .dll in sys32 or what? Directions aren't clear.

**davedurg08** · July 22nd, 2008, 01:16

think i might have a fix add [email protected] to msn messenger and ill take you through step by step

**SSGotenksUFO** · July 25th, 2008, 04:35

When I run ps3sixaxis_en.exe, all it says is that it found 3 busses, and nothing else. I ran it from the desktop and the system32 folder. Windows detects the controller, but when I try to press the buttons in Game Controllers, it doesn't respond.

What am I doing wrong?

**Akkeresu** · July 26th, 2008, 22:24

Good evening everyone,

I was having the same issue, detected, but not usable.

After scouring a few forums, I found a solution that works, and should be just fine.

Gamesake - SIXAXIS Setup.7z - 0.27MB

This driver set still requires LibUSB32, so install the latest version via Sourceforge, then install this. Simply click Load Driver. This has been tested via the Control Panel (12 buttons, X/Y Axis, Z Axis, Z Rot. and POH [D-Pad]) and ZSNES.

For you paraniod people like me, this was scanned via Zone Alarm Security Suite, latest version, using the Kapersky Engine, and was revealed to be clean.

So, with that, I take my leave, and wish you all happy gaming.

~Akkeresu

**Souls360** · July 28th, 2008, 16:03

Hi, this might have been posted before, but I really don't feel like reading 40 pages of that.. honestly.. -_-...

but does the driver only work for the vista x32 version, cause I'm running on the 64bit and I was wondering if it was functional on that too cause for me its not and and I would just like to confirm that status... if that being the case thats really gay... I wannna use iiittt!!!

**biz69** · July 29th, 2008, 11:03

Originally Posted by SSGotenksUFO

When I run ps3sixaxis_en.exe, all it says is that it found 3 busses, and nothing else. I ran it from the desktop and the system32 folder. Windows detects the controller, but when I try to press the buttons in Game Controllers, it doesn't respond.

What am I doing wrong?

i was getting that but i pressed the ps button while opening it and it came up with some other lines now it works:thumbup:

**daia218** · July 31st, 2008, 13:23

it does not come up as a zip file

**Chadwarden** · August 5th, 2008, 00:19

doesnt work

**Chadwarden** · August 5th, 2008, 00:28

please make one that WORKS...

**KmmDrew** · August 6th, 2008, 09:28

Originally Posted by Akkeresu

Good evening everyone,

I was having the same issue, detected, but not usable.

After scouring a few forums, I found a solution that works, and should be just fine.

Gamesake - SIXAXIS Setup.7z - 0.27MB

This driver set still requires LibUSB32, so install the latest version via Sourceforge, then install this. Simply click Load Driver. This has been tested via the Control Panel (12 buttons, X/Y Axis, Z Axis, Z Rot. and POH [D-Pad]) and ZSNES.

For you paraniod people like me, this was scanned via Zone Alarm Security Suite, latest version, using the Kapersky Engine, and was revealed to be clean.

So, with that, I take my leave, and wish you all happy gaming.

~Akkeresu

Ive done the same thing but unfortunately my Z axis registers as left and right and my z rot is up and down. Are you having the same issue?