3.02OE Installation Guide

**splodger15** · December 22nd, 2006, 18:50

I thought i would write up a little tutorial for 3.02OE.
I will try to explain it in details for both 1.50 and 2.71se users,

You will need these files:
1- 302OE get it here
2- 1.5 update get it here
3- 3.02 update get it here
4- usb cable
5- PSP

Downlaod all of these files.

extract the 302OE ziped file, you will get the following files as shown in the following image:

http://img146.imageshack.us/img146/5240/1em8.png

Now for 1.50 users copy the two folders oeupdmaker and oeupdmaker% to /PSP/GAME/ so it will look like this image: http://img117.imageshack.us/img117/7523/2bv0.png

If you are using 2.71 SE copy the two folders to the GAME150

Rename the 1.50 update you downloaded earlier to 150 then rename the 3.02 update you downloaded earlier and rename it to 302.Just like the image shows: http://img75.imageshack.us/img75/1157/3ht1.png

After renaming put them on your PSP inside the "oeupdmaker" folder, then disconnect your PSP from the computer. It should look like this: http://img344.imageshack.us/img344/8672/4yn6.png

Run the oeupdmaker like you run any homerew, it will start creating the DATA.DXAR file, it will take less than 5 minutes to generate it, this process involves NO flashing, so 100% safe, no need to have your PSP plugged in the charger

Wait till it completely finish and it will exit by itself.

Now connect your PSP to the pc again, you will find the DATA.DXAR file that we made inside the oeupdmaker folder, It will look like this: http://img172.imageshack.us/img172/9007/5nl4.png

Now we are going to begin flashing 3.02

This process requires flashing and like anything that flashes your PSP there is always a chance of BRICKING.

Aslong as you have done everthing correct you should be fine.

Now we will use the other two folders we extracted earlier, 302oeflasher and 302oeflasher% ,
You will need to copy these two to GAME folder on your PSP "in 1.50". And in the GAME150 folder if you are using 2.71 SE(Any version) Look at the image: http://img102.imageshack.us/img102/6231/6jw9.png

Next move the DATA.DXAR file that we made earlier to "302oeflasher" folder, then disconnect your PSP from the pc, make sure the battery is charged above 75% and plug it into your charger. Look at the image: http://img295.imageshack.us/img295/7427/7lw9.png

Now go to the flasher from you PSP and run it, it will show you a warning message, just press X and it will start, the process may take 5 minutes,

DON’T turn off the psp or remove the Memory stick or pull out the battery during the process.

When it will finish it will ask you to restart your psp manually, here turn off the PSP then turn it on, and you have 3.02OE.

After you finish you can just delete the folders 302oeflasher, 302oeflasher%, oeupdmaker, oeupdmaker% with all their contents.

Enjoy

**gamerremag** · December 23rd, 2006, 01:08

computer wouldnt go to this site for a while....what is 3.02oe?

**englishrick** · December 23rd, 2006, 01:52

How do I get VCS cheat to work on this?????????

**cha0ticbliss** · December 23rd, 2006, 01:56

The site was down.... It is 2.71 SE except on 3.02 firmware.

**angusW** · December 23rd, 2006, 08:34

Nice tut splodger15. Thanks. I'll try it out once I get home from work.

**gamerremag** · December 23rd, 2006, 15:30

Originally Posted by cha0ticbliss

The site was down.... It is 2.71 SE except on 3.02 firmware.

thnx

**angusW** · December 24th, 2006, 02:24

Every time I go to the flasher it will say that the battery has to be at least 75%, it's at 100% and the power cable is plugged in. The screen will then go black for about 10sec and then it will go to the xmb.

I followed the above process to a "T". What gives? I'm on fw 1.5 btw

Ok. Nevermind. I by-passed that message by pressing the triangle and L buttons at the same time. In the processing of flashing at this time.

Flash successful. Right ON.