
Originally Posted by
deniska
From what I see, it seems that the driver or the device have 3 initial position aquisition algorithms which can be passed to the device via sceUsbGpsSetInitDataLocation() method.
(since the method only accepts 0, 1 & 2 as parameters...
In any case, I am extremely dissapointed with the reception quailty of the device...
Even after the initial fix it tends to loose the fix frequently or tune on to "bad" combination of satellites, resulting in a high horizontal dilusion of presision (HDOP)...
I did a 10 minute test drive with a new version of MapThis! (with usbgps support). During this test the Sony unit lost the coordinates ~10 times, thrown the display location ~70 meters off the actual coordinates ~3 times (put the marker half a block away with incorrect bearing and HDOP >30)
Also, I could not get the initial fix inside the car, so I had to step out, walk away from nearby buildings and wait for ~ 3 minutes...
My holux gpslim236 unit would get a fix inside the car within ~50 seconds and have a stable fix with ~10m accuracy in the same area... :-(
So I am not sure if the sony unit is going to be useful for any serious navigation in urban areas...
I imagine that Maplus sowtware gets away with this bad gps reception quality by approximating the last known location to the nearest road (sticking to the road) which is impossible to implement in current version of MapThis...
Perhaps someone could disassemble the unit and find a way to atach an active anntenna (or any other way to increase the reception quality)
There is alway a chance that, somehow, I got a defective unit :-)
Bookmarks