MAP THIS! version 0.461S (beta) with support for PSP-290 GPS accessory

[kRiSiS112]

I'm having major problems with the prx files. I put them in the properly named folder in the root of my mem stick, so that's right, and I've tried the 2.71, 3.00, 3.03, 3.10, and 3.11 usbacc.prx files and I always get the same usb accessory module error. What could be wrong?

I have a TA-082 with 3.10 OE-A' custom FW.

[zsc]

i think the prx files are supposed to go in the "mapViewer" folder of your GAMEXXX where XXX is the number for your FW, GAME310 in your case.

[kRiSiS112]

EXCELLENT. thanks a lot. weird..could've sworn i saw different instructions elsewhere

[GiUd@]

sorry,
can't i get the two prx grom my cusftom fw 3.03oe-b from flash0/kn ???

because i can't dump original fw...

[Mystheryman]

That's possible

[GiUd@]

ok i've done it with 3.03 original fw...but the application still doesn't work...

i've putted PSP-290 in PSP/GAME and the two prx in the same folder...right?

[Russoxley187]

ok i've done it with 3.03 original fw...but the application still doesn't work...

i've putted PSP-290 in PSP/GAME and the two prx in the same folder...right?

I did the same thing, but with the other file from the generic folder for serial gps's.
Game can not be started...

[GiUd@]

now i've also taken the 3.11 prx, but mapthis 0.48 still doesn't work...

any ideas?

[Russoxley187]

What error does youre give you?
I have a serial GPS, so i used the correct eboot and it tells me that the game can not be started.
But with the 290 gameboot it would start correctly, just not track sats obviously...
What version do I need?
Can somebody post the entire thing back up, not just the eboot for the version.
Maybe thats my problem.
not sure
3.03oe-c is what I'm runnin...
Anyways I was able to get rid of the prx error, now it wont start...
Somebody help me please...

[rhygin]

@Russoxley187
The 0.48 release is only for GPS290 so will not work with your serial GPS.
To get it working with 0.47 do the following:
First install the latest 0.46 for serial GPS(you can find the link for this in my FAQ in deniskas discussion forum). Then you have to be sure you use the correct EBOOT.PBP. In the package for 0.47 there are two EBOOT.PBPs, one for GPSSlim and one for PSP290.
You need the one for GPSSlim its size is 701KB in windows explorer (the size of the GPSSlim EBOOT.PBP is 796KB). Put this EBOOT.PBP in the mapviewer folder and leave the original EBOOT.PBP in the mapviewer% folder.
This way it works for me with holux gpsslim236 and 3.03oe-c firmware