What firmware versions are being shipped out now? (aka what should I do)

[rg45]

Ok, I got a problem. I have a 1.50 launch psp with the sticky square button issue however I have a in-store warranty that expires in a month. I would just swap it out for a new one but I'm afraid of getting a TA-081 or a 2.81+ fw (or both). Are TA-081 still crippled systems? Playing psone games is a big deal for me.

Would my other option be to buy a faceplate w/buttons or did sony actually change the pcb on the d-pad for the fixed ones...a little help guys, thanks.

[dejkirkby]

Just buy a new button set and faceplate. They are pretty cheap.

[MikeDX]

I really doubt it matters what firmware you will get back from warranty as you should get a 3.03, even if its a TA-082 you can still downgrade with fanjitas help in the next week or so.

[rg45]

Just buy a new button set and faceplate. They are pretty cheap.

So that would defiantly fix the problem then?

[Tetris999]

So that would defiantly fix the problem then?

well u dont gotta worry bout anything pretty much

[rg45]

well u dont gotta worry bout anything pretty much

I thought I read something a while back that the original psps had off center square button contact which is one of the causes of the sticky square button issue. I would hate to get a faceplate put it in and have the square button not work at all then my warranty would be voided for nothing.

[splodger15]

Yeh i think it was the Black PSP's with the square button issue although u heard they were fixed on the White PSP's

[scottyboynow]

Just get a new one, it'll be able to be downgraded in about a week or so.

[rg45]

Just get a new one, it'll be able to be downgraded in about a week or so.

Sorry for my ignorance but can the TA-082s play the ps1 emulator via the custom firmware? The tutorials I've been reading say you need a non ta-082 psp.

[scottyboynow]

I say in about 2/4 weeks you will be a happy TA-082 1.50er (or 3.03OE-C), if a hello world app has just come out I reckon that it would only be a matter of time (according to Fanjita) till a 3.03 downgrader is released, so get a new one, and hope that it is a low firmware or if not a low firmware, just wait.:-)
P.S TA-082 can do anything now unless it says TA-079-081 on the downgrader descreption.
P.SS Where do you live.