I have never used this, but I did a quick search. The only information I could find was this:
Operation manual:
1. The PC will mention u that new device found when u plug in the writer for the first time, after drivers installed, the LED will light red, then turn to green to indicate writer is ready.
2. Run the client software, if the writer is not plugged or not light green, the client will mention u that no EZ-Writer found. After writer works, the client will mention u that state of the cart.
3. When the LED on writer turn to red, it's wroking, never plug in or pull off cart at this time. When the LED light green, u can plug in the EZ-Cart, then the client will show u a list of games on the cart and the remained space.
4. Add games u want at client, then update to cart, writer will turn to red indicating it's busy working, when finished the LED will turn to green again. Now u can pull off the cart and enjoy it on GBA
It may not be any better than the instructions you already have. If you want to check out the site I got this from here is the link. http://www.gameboy-advance.net/flash_set/ez_flash.htm
Hope it helped.
Bookmarks