NDS: SavSender 1.1 released - dump/restore save files via Wifi

**ButterBeer121** · November 4th, 2007, 13:17

http://www.scdev.org/forum/index.php?topic=9915.0

Just change the .info to .org.

The program works great. Only problem is that it's as slow as hell, but you're trying to extract a 512kb file from a card and transfer it over a wireless connection using a portable game device, so how fast do you expect it to be? It would also be really cool if the program could extract the entire game ROM.

**WillWill56** · November 25th, 2007, 02:21

I'm having a bit of trouble with the resolving host part.
Also, do you enter your computers IP? I'm using my routers IP.

From my DS:

Welcome to savsender 1.1!
Connected to AP.
Opening config file...
Server is at 192.168.0.1
5000:0...
Press A to dump, or B to restore
.
Detected EEPROM of type 3, size
262144
Reading 262144 bytes from EEPROM
...
Resolving host...

It gets stuck there and won't budge.

...Help?

**pizzatacoman** · November 25th, 2007, 03:51

Hmm...

When I run the program it says..

Resolving host...
Resolved to 208.69.32.137
Connecting to server....
Error!
Sending EEPROM contents....

And then it does that forever.

I have the conf file setup:

192.168.1.01 (my computers ip)
5000

I have port forwarding setup to send to 192.168.1.101.

When I run the progam it creates the save file on the desktop but it remains 0kb forever. I have no idea what I'm doing wrong.

**WillWill56** · November 25th, 2007, 04:01

what server are you using? netcat, savreceiver or savsender server?

**pizzatacoman** · November 25th, 2007, 04:08

netcat

**WillWill56** · November 25th, 2007, 07:28

In your case it might pay to try a different one, but with mine... well, I don't really know, but mine has nothing to do with the server.

**DanTheManMS** · November 25th, 2007, 19:01

WillWil56, you need your computer's IP, not the router's. pizzatacoman, no clue, try SavReceiver I guess.

**WillWill56** · November 26th, 2007, 07:16

Thank you! An actual answer instead of "Go back and read the instructions!".

Edit: Changed it to my PC's IP, still nothing. I might need help with the port opening/forwarding bit.
I have Dial-Up if that changes anything for port opening.
And hopefully there is someone out there kind enough to reply within the next hour!!!!!!!!!!!!

Edit Again: Sorry about the double post below, the server hid this post so I posted a new one and this one magically appeared!