DSOrganise Error!

**Malumvolo** · June 7th, 2007, 22:22

I just got my R4, I installed the latest firmware, and I added DSOrganise.

I get this error when launching DSOrganise:

You are not using a card that is compatable with Chishm's FAT library. Please run this program using a GBAMP or other compatable card!

Any Idea whats wrong? Is it my Micro SD card?

**voteforpedro36** · June 8th, 2007, 00:41

No, just DLDI patch it.
There's a guide in the stickies of this forum (somewhere). Else go to http://dldi.drunkencoders.com and find what you're looking for.

**packstin** · June 8th, 2007, 03:29

I had the same problem, then I DLDI patched it and it got past that error. Thanks

Unfortunately, now it says
"Initializing DSOrganize
Initialized Patched Driver
Initializing plugins and settings"

Then it just freezes. Is it because I'm using MMD?

**voteforpedro36** · June 8th, 2007, 04:17

Yeah. Rename it to "bootme.nds" and make sure it is in the root of the card (ie: You plug your MMD in the computer, and it comes up with a drive, say E, put it in E:/). Make sure the DSOrganize folder is there too.

**packstin** · June 8th, 2007, 18:14

Sweet, thanks a ton, i really appreciate it.

**packstin** · June 9th, 2007, 03:38

Alright, last question. Got the program running perfectly.

However, when I try to boot another program from DS Organize, it says, "There is no built in bootloader for your card. Please configure the bootloaders in the configuration screen"

Is this a result of the fact that I'm using MMD?

Thanks for all the help. Really.

**DanTheManMS** · June 9th, 2007, 04:54

Patch the \DSOrganize\Resources\exec_stub.bin file with the DLDI file for your device.

**packstin** · June 9th, 2007, 15:50

Tried it, but it didn't work. I patched it just fine, but the error still comes up.

**voteforpedro36** · June 9th, 2007, 18:20

Go to configuration (like on the third page), and set the loader to Chishm's DLDI one. Tell me if it works too, it would load but wouldn't let me use the touch screen and some other stuff.