PSP 290 on 3.40 OE-A , GPS State: OFF!!

[FatesWebb]

have you tried pressing SQUARE? to turn on the gps mode? as it is off by default, and I don't see where you say you have tried that...

also what happens in the gps tester program?

[jeffysg]

try mine http://files.filefront.com//;7436650;;/
the prx files are for 3.30 OE-A and 3.40 OE-A

[hdhg]

yes i have pressed square
it doesn't work with the provided files either

[FatesWebb]

you didn't answer my question, well you answered the one about pressing square, but skipped the more important one.

[hdhg]

When you first turn the tester on
-Loading USB Accesory module... ok
-Loading USB GPS module... ok
-Starting USB BUS driver... ok
-Starting USB Accesory driver... ok
-Starting USB GPS driver... ok
-Opening USB GPS device... ok
-USB State = 0x111 [deactivated]
-GPS State = -1 location: 0
When you press X
-USB State = 0x211 [activated]
-GPS State = 0 location: 0

[hdhg]

bump
btw, is there any way to get this to work on m33

[hdhg]

still no answer...

[tommynason]

i have same problem...gps state is always off no matter how many times i push square or set it to read gps from unit....its getting really anoying ive tried about 5 different peoples sets of files.

[PDG]

bump
btw, is there any way to get this to work on m33

Just follow my guides to get a PSP-290 running on 5.32 M33-2

And if it dosent work try disabling Plugins and yeah, hit Square to activate GSP and stand outside the car if you want to hunt for sat signals

[sleekyboy24]

Make sure you disable your WIFI. I had the same problem before