PLEASE HELP! Recovery menu crashing

**jeegee** · June 27th, 2007, 09:14

Hi, Can anyone help me please? I am using cfw 3.40oe-a, The problem is when i go into recovery menu and select Configuration my psp freezes. It tries to display the configuration screen but has no text on it (ie blank blu screen). I cant turn it off manually, it shuts down on its own. Another symptom of this prob is that when i select Toggle USB in recovery menu it also freezes. Tried reflashing to no avail. Is there a way to fully dgrade a 3.40 custom back to 1.50 and start again? Any help would be most welcome. Thanks in advance guys an gals :thumbup:

**-Xandu-** · June 27th, 2007, 10:06

Yes, read the readme/instructions included with the custom firmware and use the recovery EBOOT to go back to 1.50 then you can upgrade back to Open Edition.

**jeegee** · June 27th, 2007, 10:22

Thanks! Will try that right about now

here is a link to a vid i made of it. Just to demonstrate the problem. Thanks again Xandu

**jeegee** · June 27th, 2007, 12:31

Ok, i did full dgrade to 1.50 no probs there then flashed 3.40oea. Went to recovery->configuration->Blue screen NO TEXT still->auto power off

Any other ideas please? I kinda need access to that menu...

**sinchoa** · June 27th, 2007, 12:36

it's a little problem, you must (only) format your flash1...

if you downgrad and upgrad your psp, the problem will be the same...

format flash1!!!

:thumbup:

use flash1 formatter V2